Operation Manual

English - 46
MENU FUNCTIONS
Edit day
To edit the timer settings, rst select the day to edit from
the Overview screen using the arrow left and arrow right
followed by OK.
Up to two time intervals per day can be entered. To enter
an interval for Period 1, rst make sure that the check box
next to Period 1 is checked. To check/uncheck select the
check box and press OK. Enter the desired times using
the numeric keypad.
If two intervals are desired, rst check the check box next
to Period 2 then enter times as above. Two intervals can
be useful for enabling the lawn for other activities during
certain hours, for example by entering Period 1: 00:00-
15:00 and Period 2: 21:00-24:00. The mower will then be
parked in the charging station between 15:00 and 21:00.
To disable mowing during the whole day, uncheck both
periods.
Copy
Use this function to copy the current day settings to
other days.
Use the up and down arrow keys to move the cursor
between days. The times will be copied to the days that
are marked with OK.
Reset
This function resets the timer to the factory setting, where
the robotic lawnmower is allowed to operate 24 hours
a day every day.
Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower
is allowed to operate 24 hours a day.
All week
This resets all days in the week.
The factory setting is that the robotic lawnmower
is allowed to operate 24 hours a day every day.
3018-311
3018-310
3018-320
1157808,Gardena_R100Li-R130Li,GB_151217.indd 46 2016-01-12 09:16:50