Operation Manual
English - 54
MENU FUNCTIONS
Advanced
Under the Advanced heading, there are even more
settings relating to the behaviour of the robotic
lawnmower. The settings in this menu are only required
if additional control of the lawnmower is denitely needed
e.g. in very complex gardens. The factory settings are
selected in a way that should suit most working areas.
Corridor width
The corridor width is a measure of how far from the guide
wire the robotic lawnmower is allowed to travel when it
follows this to and from the charging station. The area
beside the wire which the robotic lawnmower then uses is
called the Corridor.
The aim of operating at varying distances from the wire
is reduce the risk of tracks forming. To reduce the risk
of tracks forming, it is recommended to select the widest
corridor possible allowed by the size of the working area.
The robotic lawnmower itself adjusts the corridor width
according to the size of the working area when following
along a guide wire. The inbuilt automatic mechanism
allows the robotic lawnmower to vary the distance from
the wire depending on where in the working area it is
located. It automatically makes the corridor narrower in
narrow passages for instance.
The factory settings can be used for many working
areas, i.e. the robotic lawnmower itself can use the inbuilt
functions to operate in the widest possible corridor.
In more complex gardens e.g. where the guide wire is
placed close to obstacles which cannot be isolated using
the boundary loop, operational safety can be improved by
carrying out some of the manual settings outlined below.
Corridor width > Guide
The function AutoPassage handling will automatically
adjust the guide corridor width. Only in rare occasions
manual settings need to be entered. The corridor width
can be set between 0 and 9.
If value 0 is specied, the robotic lawnmower will straddle
the guide wire meaning it runs right over the middle of the
guide wire.
Use the arrow keys to specify the required value.
The factory setting is 9.
3018-314
3023-020
3023-021
3018-315
1157808,Gardena_R100Li-R130Li,GB_151217.indd 54 2016-01-12 09:16:57