Operation Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Installation
- Presentation
- Preparations
- Charging station
- Charging the battery
- Boundary wire
- Connecting the boundary wire
- Installation of the guide wire
- Checking the installation
- First start-up and calibration
- Control panel
- Menu structure
- Timer
- SensorControl
- Smart System
- Security
- Installation
- Settings
- Menu structure overview
- Menu structure overview
- Yard layout examples
- Open and level area
- A number of islands and a 35% slope
- L-shaped garden with a couple of islands and the charging station installed in the narrow area
- U-shaped garden linked with a narrow passage
- Unsymmetrical working area with a narrow passage and a number of islands
- 3 areas linked with two narrow passages
- A secondary area
- Operation
- Maintenance
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Warranty
- EC Declaration of Conformity
Data R100Li, R100LiC R130Li, R130LiC R160Li, R160LiC
Mowing
Cutting system 3 pivoted cutting blades
Blade motor speed,
rpm
2300 2300 2300
Power consumption
during cutting, W +/-
20 %
25 25 25
Cutting height, cm 2-6 2-6 2-6
Cutting width, cm 22 22 22
Narrowest possible
passage, cm
60 60 60
Maximum angle for
cutting area, %
35 35 35
Maximum angle for
boundary wire, %
15 15 15
Maximum length
boundary wire, m
800 800 800
Maximum length
guide wire, m
400 400 400
Working capacity,
m
2
+/- 20%
1000 1300 1600
IP-classification
Robotic lawnmower IPX4 IPX4 IPX4
Charging station IPX1 IPX1 IPX1
Transformer IPX4 IPX4 IPX4
Internal SRD (short range device) R100Li, R100LiC R130Li, R130LiC R160Li, R160LiC
Operating frequency band, MHz - 863-870 - 863-870 - 863-870
Maximum radio-frequency power,
mW
- 25 - 25 - 25
Free field radio range, approx. m - 100 - 100 - 100
Husqvarna AB does not guarantee full compatibility between the robotic lawnmower and other types of wireless
systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar.
307 - 002 - 11.10.2017 Technical data - 53