Operation Manual

Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.9.2 To set the time & date
1. Do steps 1–3 in
To get access to the menu
on page 22
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
General > Time & Date .
3. Use the number buttons to set the time and
then push the BACK button.
4. Use the number buttons to set the date and
then push the BACK button.
5. Use the arrow buttons to set the time format
and then push the BACK button.
6. Use the arrow buttons to set the date format
and then push the BACK button.
3.10.9.3 To set the language
1. Do steps 1–3 in
To get access to the menu
on page 22
.
2. Use the arrow buttons and the OK button to
move through the menu structure Settings >
General > Language.
3. Use the arrow buttons to select language
and then push the BACK button.
3.10.9.4 To set the country
1. Do steps 1–3 in
To get access to the menu
on page 22
.
2. Use the arrow buttons and the OK button to
move through the menu structure Settings >
General > Country.
3. Use the arrow buttons to select country and
then push the BACK button.
3.10.9.5 To reset all user settings
1. Do steps 1–3 in
To get access to the menu
on page 22
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
General > Reset all user settings .
3. Use the right arrow button to select
Proceed
with reset of all user settings?
4. Push the OK button to reset all the user
settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language and Country
settings are not reset.
3.10.9.6 The About menu
The
About menu displays information about the
product, for example serial number and software
versions.
3.10.10 GARDENA smart system
Only for R160LiC.
The product can connect to mobile devices that
have the GARDENA smart system app installed.
The GARDENA smart system makes it possible
with wireless interaction between your smart
product and other GARDENA smart system
devices, such as smart Water Control and smart
Sensor.
In this menu you can:
• Enable your smart product to include with or
exclude from the GARDENA smart system
app.
• Check the status of the wireless connection
to the smart system.
Note: The inclusion sequence might take several
minutes. Once the inclusion has succeeded you
will automatically return to the product start
screen. If the inclusion by any reason fails, try
again.
3.10.10.1 Installation
Make sure that the smart product is fully installed
before you include it into the GARDENA smart
system app. Refer to
Installation on page 15 . It is
important to plan the installation carefully.
3.10.10.2 Activate inclusion mode
In order to include your smart product into the
GARDENA smart system app:
1. Select the smart system icon from the main
menu in the product and press OK. The
option
Activate Inclusion Mode appears in
the display.
2. Select Yes by pressing the right arrow
button and then press OK.
3. Enter the PIN code by using the number
buttons and press OK.
26
- Installation
1025 - 001 - 23.01.2019