Full Product Manual

800.624.4320 • Milwaukee, WI 53151 • gardnerbender.com
GAR_TL_086_0320_B1000
12
9.0 WARRANTY INFORMATION
GARDNER BENDER LIMITED WARRANTY: Gardner Bender warrants its product against defects in workmanship and materials for 1 year from date of delivery
to user. Chain is not warranted. Warranty does not cover ordinary wear and tear, abuse, misuse, overloading, altered products or use of improper fluid.
LIMITED: Limited means that GB warrants to the original purchasers of products from GB authorized distributors at the time of shipment such products shall
be free of defects in material and workmanship while the tool is used under normal working conditions. Standard wear and tear, dulling over time, overloading,
misuse, and acts of God are not covered under warranty. This warranty does not cover batteries, fuses, or test leads.
When a warranty claim arises, the purchaser must contact GB. If the defect comes under the terms of this limited warranty,
GB will arrange, at its sole discretion, one of the following options:
• The product will be repaired at an authorized GB Service Center
• Product will be replaced
The purchaser is solely responsible for determining the suitability of GB for the purchaser’s use or resale, or for incorporating them into articles or using them in
the purchaser’s applications. The distributor is authorized to extend the foregoing limited warranty to its original purchasers in connection with the sales of GB
products, provided that such products shall not have been altered by the distributor. The distributor shall be fully responsible for any warranties the distributor
makes to its purchasers which are broader or more extensive than GB limited warranty.
LIFETIME WARRANTY
Warranty Limitation: The forgoing warranties are exclusive and are in lieu of all other express and implied warranties whatsoever, including but not limited
to implied warranties of merchantability and fitness for a particular purpose. The foregoing warranties do not cover ordinary wear and tear, abuse, misuse,
overloading, alterations, products which have not been installed, operated or maintained in accordance with GB written instructions. Test leads, fuses, and
batteries are not covered under any implied warranty. “Lifetime” of products that are no longer offered by GB will be either repaired or replaced with an item of
GB Instruments choice of similar value. Lifetime is defined as 5 years after GB discontinued manufacturing the product, but the warranty period shall be at least
ten years from date of purchase. Original proof of purchase is required to establish original ownership of product. No warranty will be honored unless an invoice
or other proof of purchase date is provided to Gardner Bender. Hand written receipts or invoices will not be honored.
©2019 ECM Industries, LLC All rights reserved. - https://www.gardnerbender.com/Resources/Warranty-Information
7.0 MAINTENANCE
The Portable Cyclone
®
is largely maintenance free. The roller, ring gear, and pinion gear are lubricated from the factory. This grease will become dirty and
contaminated over time and should be removed and replaced periodically. The service intervals between cleaning and regreasing will vary based on use.
The spindle bearing is a self lubricating polymer bearing. Lubrication is not required but one of the lubricants below can be applied if desired.
Recommended Lubricants:
Waylube Oil
Lightweight Oils
Petroleum-Based Grease
3-in-1 Oils
Not Recommended Lubricants:
PTFE Sprays
WD-40
Fluorocarbons
Silicone Oils, Grease or Spray
During initial startup out of the box and under heavy loads you may hear popping or unusual sounds.
This should go away after a brief break in period. If it does not go away please contact Gardner Bender customer service.
The roller may wear down over time. If the roller looks damaged or worn and it is causing the conduit to be damaged, flattened,
or kinked during bending the roller should be replaced.
Contact Gardner Bender Customer Service if there are any issues with the bender or replacement parts are required.
https://www.gardnerbender.com/en/Contact
Email: [e-mail]
Scan this QR code to provide
feedback on the Portable Cyclone
®
8.0 FEEDBACK