Full Product Manual

3
WARNING
• Reduce the risk of unintentional starting by making sure switch on the threader is in off position before plugging in.
Never leave the machine unattended. Turn power off on the threader and do not leave the machine until it comes to a complete stop.
• Keep working area of bender clear form any tools or other equipment when using the bender.
• Keep proper footing and balance at all times. Do not overreach above or around bender while it is in use.
• Unplug threader from any power source before disassembling, reassembling, and repairing any parts.
CAUTION
• During conduit bending keep hands, clothing and control cord away from the bending shoe and roller.
• Select an operating area large enough to permit loading pipe section and bending without striking objects or personnel.
• Do not attempt to bend conduit or pipe other than 1/2" through 1" IMC, EMT, rigid steel, PVC coated rigid, or aluminum.
Bending other materials may damage the bender and will void the warranty.
• Conduit moves rapidly as it is bent. The path of the conduit must be clear of obstructions.
• Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
Nonslip footwear is recommended. Wear protective hair covering to contain long hair.
• Use for bending only. Do not force machine to do a job for which it was not designed. Use this machine only for the manufacturer’s intended purpose.
Use other than that which is instructed in this manual can result in injury or property damage.
• Keep children away. All visitors should be kept safe distance from work area.
• Make workshop kid proof with padlocks, master switches, or by removing starter keys.
• Use recommended accessories. The use of improper accessories may cause risk of injury to person
• Maintain tool with care. Keep tool clean for best and safest performance.
Follow maintenance and troubleshooting instructions for lubricating and changing parts.
• Support conduit when unloading it from shoe. Conduit can become loose while retracting the bending shoe.
• Keep all decals on threader clean and legible at all times.
• Inspect for any damaged/malfunctioning parts before using the bender.
If any damaged/malfunctioning parts are found during inspection, repair or replace parts.
3.0 SPECIFICATIONS
Power Source
11-R or 12-R Pipe Threader
Weight
35 lbs.
Height
14.5 inches
Width
11 inches
Length
17 inches
Bend Capability
1/2" - 1" IMC, EMT, Rigid Steel, Rigid Aluminum, or EMT Aluminum
1/2" – 3/4" PVC Coated Rigid
Contents Included
B1000 Portable Cyclone
®
Control Pendant
Speed Control Box
12-R Adapter
Post Adapter
Other Available Units
PT200 Power Driver
Portable Cyclone
®
Case
Horizontal Mounting Hardware Kit
Power Driver Case
B1000PT Portable Cyclone
®
and Power Driver Kit