MSDS

MATERIAL SAFETY DATA SHEET
F825 Liquid Tape
Page 2 of 7
Section 3: COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient UN Number H / F/ R / Special* CAS # Wt. %
Solvent naphtha (petroleum), light aliph. UN1263 Not available. 64742-89-8 15 - 40
Ethylbenzene UN 1175 2/3/0 100-41-4 1 - 5
Xylene UN 1307 2/3/0 1330-20-7 10 - 30
Heptane UN 1206 1/3/0 142-82-5 10 - 30
Methyl ethyl ketone UN 1193/1232 1/3/0 78-93-3 5 - 10
* Per NOM-018-STPS-2000
Section 4: FIRST AID MEASURES
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
If easy to do, remove contact lenses, if worn. Get medical attention immediately.
Skin Contact:
In case of contact, immediately flush skin with plenty of water. Remove
contaminated clothing and shoes. Wash clothing before reuse. Call a physician
if irritation develops and persists.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Ingestion:
If swallowed, do NOT induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person.
General Advice: In case of accident or if you feel unwell, seek medical advice immediately
(show the label or MSDS where possible).
Note to Physicians: Symptoms may not appear immediately.
Section 5: FIRE FIGHTING MEASURES
Flammability: Flammable by WHMIS/OSHA criteria.
Means of Extinguishing:
Suitable Extinguishing Media: Powder, foam, carbon dioxide.
Unsuitable Extinguishing Media: Not applicable.
Products of Combustion: May include, and are not limited to: oxides of carbon.
Explosion Data:
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Protection of Firefighters: Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker
gear) and respiratory protection (SCBA).
Section 6: ACCIDENTAL RELEASE MEASURES
Personal Precautions: Use personal protection recommended in Section 8. Isolate the hazard
area and deny entry to unnecessary and unprotected personnel. Eliminate sources of ignition.
Environmental Precautions: Keep out of drains, sewers, ditches, and waterways. Minimize
use of water to prevent environmental contamination.
Methods for Containment: Contain and/or absorb spill with inert material (e.g. sand,
vermiculite), then place in a suitable container. Do not flush to sewer or allow to enter
waterways. Use appropriate Personal Protective Equipment (PPE).