Operating Guide

ManualsBrandsGardner Bender ManualsTest MetersVD7504GFI

THANK YOU

We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this circuit tester. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for

choosing Commercial Electric!

Item # 1002 153 664

Model #CE-VD7504GFI

USE AND CARE GUIDE

DUALCHECK™ CIRCUIT TESTER

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Summary of content (8 pages)

PAGE 1
Item # 1002 153 664 Model #CE-VD7504GFI USE AND CARE GUIDE DUALCHECK™ CIRCUIT TESTER Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this circuit tester. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Table of Contents............................................................... 2 Safety Information ............................................................ 2 Warranty......................................................................... 2 Pre-Operation .................................................................. 3 Product Description .................................................................. 3 Product Specifications...................................................
PAGE 3
Pre-Operation PRODUCT DESCRIPTION Part A B C D E F Description GFCI test button Circuit indicator LED panel Speaker Non-contact voltage (NCV) detection button NCV LED indicator NCV test probe Quantity 1 1 1 1 1 1 PRODUCT SPECIFICATIONS Component Operating range Certification and Compliance Indicators Battery Operating environment Specification 115 - 125 VAC, 50-60 Hz (circuit tester) and 50 - 600 VAC, 50-60 Hz (NCV detection) Conforms to UL 1436 (circuit tester) UL 61010-1 & 61010-2-030 (NCV detection)
PAGE 4
Operation 1 Testing an outlet circuit NOTICE: All appliances or equipment on the circuit being tested should be unplugged to help avoid erroneous readings. NOTICE: This is not a comprehensive diagnostic instrument but a simple instrument to detect nearly all probable common improper wiring conditions. NOTICE: Refer all indicated problems to a qualified electrician. NOTICE: This tester will not: - Detect two hot wires in a circuit. - Detect a combination of defects.
PAGE 5
Operation (continued) 2 Testing GFCI protected outlets CAUTION: GFCIs are sometimes installed in 2- wire systems (no ground wire available). This may or may not meet the local code. This tester will not trip GFCI outlets installed without a ground wire. On 2-wire systems, use the Test and Reset buttons on the GFCI outlet to demonstrate proper operation. To detect which downstream outlets are protected by the GFCI, place the tester in these outlets and use the Test and Reset buttons.
PAGE 6
Operation (continued) 3 Testing non-contact voltage (NCV) NOTICE: Static Electricity – The tester is subject to electrical static interference. If the LED or tone activate momentarily it is detecting static electricity. When detecting voltage the LED and tone will cycle continuously. NOTICE: NCV detection antennae interference – The presence of objects near the probe tip can decrease the sensitivity of the tester. Keep your finger away from the LED lens and probe tip to ensure adequate detection range.
PAGE 7
Installing or Replacing the Battery This tester comes complete with one LR44 battery in the package. When replacing, always replace with another LR44 battery. To install or replace the battery: 1. Orient the tester backside up and use a small Phillips screwdriver to remove the battery compartment cover (marked with the battery symbol). 2. Remove the LR44 battery. Use caution to prevent damage or injury to the internal components. 3.
PAGE 8
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.