Instructions / Assembly

How to repair a roof to stop leaks
REPAIRING ROOF PROJECTIONS
1. Flashings pulling away from
walls should be reset in roof
cement.
2. With flashing in place, apply
roof cement 2-3” above &
below where the flashing
meets wall
3. Embed Universal Patching
Fabric into the cement.
Spread additional roof cement
over the entire repair area.
4. Repeat for bottom of flashing.
REPAIRING CRACKS
1. Cover cracked and damaged
area with Roof Cement.
2. Cut and place a strip of
Universal Patching Fabric
into the cement. Spread
more roof cement over entire
repair area and let cure.
REPAIRING ROOF PROJECTIONS
1. Apply roof cement at base of
projection. Spread the cement
around the repair.
2. Embed Universal Patching
Fabric into the cement
directly over entire repair
area.
3. Apply additional roof
cement over fabric
reinforcement to
completely seal repair.
REPAIRING BLISTERS
1. Cut an "X" in roofing material
where blister is located. Peel
back the flaps exposing the
underlying surface. Allow area
to dry.
2. Trowel roof cement into
exposed area making sure
to cover entire area. Push
flaps back down to cover
the underlying surface.
Cover with additional roof
cement.
PROJECT HOW-TO’S™ COPYRIGHT © 2005 - 2012, GARDNER-GIBSON, INC.