Manual

Mounting Instructions for
Hardware Accessories and Gimbals
Form 12.145
NOTE: This chair has been drilled and T-nutted to fit EEz-In
®
seat mounting hardware and accessories.
1. Read instructions completely before starting assembly.
NOTE: This product comes in two separate cartons. One
contains the seat cushions; the seat base is in the other.
MOUNTING INSTRUCTIONS
1. Position hardware on seat bottom and align it with the four
T-nutted holes as illustrated in fig. 1. When mounting a
slide or swivel casting, make certain that the locking rod is
directed to the side of the seat.
2. Secure the seat mounting hardware to the seat with the four
screws.
3. Periodically tighten the screws on seat bottom.
FIG. 1
GIMBAL ATTACHMENT*
1. Position gimbal on seat bottom and align it with the two T-
nutted holes as illustrated in fig. 2.
2. Secure gimbal to seat with the two provided 1/4-20 x 1"
machine screws.
*NOTE: Gimbal provided only with certain model EEz-In
fishing chairs.
FIG. 2
Write for
a Complete
Catalog
Phone: [phone]
PO Box 8, 644 2nd Street E-mail: [e-mail]
St. Paul Park, Minnesota 55071 On the Web: www.garelick.com
6/98