INSTALLATION AND OPERATION MANUAL Production Griddle CG-48F, CG-60F, CG-72F

Part # 4520498 (01/08) Page 11
TROUBLE SHOOTING GUIDE
PROBLEM CHECKS REQUIRED ACTION REQUIRED
1. No Heat Is cord set plugged into receptacle? Connect cord to receptacle or check fuse/
breaker
Is Manual Gas Valve turned to “ON”? Turn Manual Gas Valve to “ON”
Is Main Power switch indicator
illuminated?
Turn Main Power switch to “OFF” wait 5
minutes, then turn Main power switch to “ON”.
If condition persists, send for a qualied service
technician.
2. One Zone Not Hot Enough Is thermostat set to correct
temperature?
Reset the thermostat. If condition persists, send
for a qualied service technician.
3. One Zone Too Hot Is thermostat set too high? Reset thermostat
Is thermostat indicator constantly “ON”? Reset thermostat. Send for a qualied service
technician.