User's Manual

74 Edge Owner’s Manual
APPENDIX
Pairing Tips
If you have trouble pairing, or if
the readings are erratic, try the
following suggestions.
• Position the Edge within 3
meters of the sensor while
pairing.
• Stay far away from any
other sensors while pairing.
• Restart scan if your Edge
appears to be paired with
another sensor (see page
58).
• Make sure to enable the
sensors on the Edge (see
page 58).
• Make sure the sensors are
functioning correctly.
• Replace the battery.
• Clean the sensors. Dirt and
sweat build-up on the can
weaken signals.
For heart rate monitor only:
• Reapply moisture. Use
electrode gel, water, or
saliva.
• Make sure the heart
rate monitor is snug
against your body. If you
have trouble with erratic
readings, position the
transmitter on your back.
• Wear a cotton shirt, or wet
your shirt. Synthetic fabrics
that rub or flap against
the heart rate monitor can
create static electricity that
interferes with heart rate
signals.
190-00580-00_0A.indd 74 12/1/2005 9:44:22 AM