Owner's Manual

43
Preliminary
Navigation Page with
Bearing Pointer
3. Drag the line to a map item or other location where
you want to establish a new waypoint and then
press IN on the CLICK STICK to place the new
waypoint. A waypoint information page displays.
Press the on-screen ‘OK’ button to save the new
waypoint, then press it again after returning to the
Route Map.
To review or remove a route point:
1. Select the Route from the Routes List and press the
CLICK STICK IN to display the Route Page.
2. Use the CLICK STICK to highlight the desired route
and press IN to display the Route Page for that route.
3. Use the CLICK STICK to move the map panning
arrow to the point you want to review and press
IN to pop-up the Options Menu. Select ‘Review’ or
‘Remove’ and press IN again to either display the
Information Page or remove it from the route.
To view the next point in the route:
1. Follow Steps 1 and 2 above.
2. Place the map panning arrow on the point you are
currently viewing and press IN to display the Options
Menu. Select ‘Next’ and press IN again to view the
next waypoint.
Navigating a Route
A Route can be navigated using the Map Page or the
Navigation Page. The Map Page displays your movement,
the route line, and waypoints on the route. The Navigation
Page shows compass direction and a bearing pointer.
To navigate a route:
1. Select a route from the Routes List and then press IN
on the CLICK STICK to display the Route Page.
2. Highlight the on-screen ‘Navigate’ button at
the bottom of the page and then press IN
on the CLICK STICK to begin navigating the route.
The screen changes to the Navigation Page.
3. Move to the Map Page to view the route and the
position icon indicating your current location.
4. Begin moving, watching directional information on
the Navigation Page or progress on the Map Page.
Adding a new waypoint
within a Route
Main Menu Page
Routes
190-00284-00_Prelim_FCC.indd 43 9/18/2003, 3:51:19 PM