User's Manual
Table Of Contents
- Preface
- Getting Ready
- Find It and Go!
- Where To?
- My Locations
- Viewing the Map and Using the Tools
- Creating and Editing Routes
- Using The Logs
- Using Bluetooth® Wireless Technology Hands-free Features
- Traffic Information
- Customizing the Navigator III
- Appendix
- Removing Your Navigator III from the Motorcycle Mount
- Connecting to Your Computer
- Register Your Navigator III
- Updating the Software and Map Data
- Custom POIs (Points of Interest)
- Using the Optional Remote Control
- Technical Specifications
- Changing the Fuse
- Using a Remote GPS Antenna
- Navigator III Troubleshooting
- FCC Compliance
- Software License Agreement
- Declaration of Conformity
- Index
Navigator III Owner’s Manual 27
CUSTOMIZING THE NAVIGATOR III
Adjusting the Volume
From the Main menu, touch Volume or simply press and hold
the SPEAK key. Touch and to adjust the volume of the
speaker.
Touch
Mute, or press and hold the SPEAK key, to mute and
unmute the Navigator III.
Touch
Settings to open the Audio Settings; see page 28.
Touch
Advanced to adjust the volume levels for the voice prompts
in relation to the other audio output.
Customizing the General Settings
From the Main menu, touch Settings > General.
Changing the GPS Settings
From the Main menu, touch Settings > General > GPS, or touch
the GPS Settings button on the GPS Info page.
Use Indoors—touch Yes to turn the GPS receiver off and use the
unit indoors.
Set Position—if Use Indoors is selected, you can select a location
on the map as your current location (position). Touch OK after you
select your location.
WAAS/
EGNOS—disable and enable WAAS/EGNOS. Wide Area
Augmentation System (WAAS) and Euro Geostationary Navigation
Overlay Service (EGNOS) are systems of satellites and ground
stations that provide GPS signal corrections, giving you even better
position accuracy. To learn about WAAS and EGNOS, visit http://
www.garmin.com/aboutGPS/waas.html.
CUSTOMIZING THE NAVIGATOR III