User's Manual
Table Of Contents
- Preface
- Getting Ready
- Find It and Go!
- Where To?
- My Locations
- Viewing the Map and Using the Tools
- Creating and Editing Routes
- Using The Logs
- Using Bluetooth® Wireless Technology Hands-free Features
- Traffic Information
- Customizing the Navigator III
- Appendix
- Removing Your Navigator III from the Motorcycle Mount
- Connecting to Your Computer
- Register Your Navigator III
- Updating the Software and Map Data
- Custom POIs (Points of Interest)
- Using the Optional Remote Control
- Technical Specifications
- Changing the Fuse
- Using a Remote GPS Antenna
- Navigator III Troubleshooting
- FCC Compliance
- Software License Agreement
- Declaration of Conformity
- Index
Navigator III Owner’s Manual 33
CUSTOMIZING THE NAVIGATOR III
Customizing the Map Data Fields
You can customize the information that appears in the data fields on the Map page. From the Main menu, touch Settings > Map >
> Map Data Fields.
1/2, 2/2, 1/3?
1/2 indicates this is
your first choice out
of two choices for
the layout of the data
field. 2/2 means this
is your second choice.
Some types of data
fields allow you three
choices, but some only
provide one.
➌
Select the type of data to
appear in this field.
➋
Touch the data field you
want to customize.
➊
Touch Wide or Thin.
Touch Next.
➍
Touch and to change
the field layout. Touch OK.
➎
Repeat for each data field
displayed while you are
following a route.
➏
Touch Next. Repeat for the
data fields displayed when
you are not following a route.