User's Manual

Page 1-2 GTS Processor Installation Manual
Revision A 190-00587-50
Refer to Table 1-1 for a list of compatible transponders.
1. Remote mounted transponders require a compatible controller. Contact Garmin for details.
2. Factory update is required to allow ADS-B functionality.
3. GTX Software version 6.11 or higher.
4. GTX Software version 6.10 or higher.
1.2.1 GTS Processor Configuration Options
Table 1-2 lists the GTS Processor surveillance configuration options, enabled at the time of installation.
*Requires upgrade using GTX Processor TCAS I/TCAS II Enablement Process. See Section XXX for instructions.
1.3 Interface Summary
The GTS Processor is designed as an open architecture system that uses typical ARINC 429, RS-232, and
Ethernet communications interfaces.
1.4 Technical Specifications
1.4.1 Environmental Qualification Form
It is the responsibility of the installing agency to obtain the latest revision of the GTS Processor
Environmental Qualification Form. To obtain a copy of this form, see the dealer/OEM portion of the
Garmin web site (www.garmin.com
). This form is available directly from Garmin under the following part
number:
GTS Processor Environmental Qualification Form, Garmin part number 005-00630-02
Table 1-1 Compatible Transponders
GTX Transponder
Model
Capable of
Receiving TCAS II
Broadcast Data
(Required for GTS
Processor)
ADS-B Capable
RTCA DO-185A/B
Compatible
GTX 330/330D
Yes
(3)
Yes
(2)
No
GTX 330 ES/330D ES
Yes
(3)
Yes No
GTX 33/33D
(1)
Yes
(3)
Yes
(2)
No
GTX 33 ES/33D ES
(1)
Yes
(3)
Yes No
GTX 328
Yes
(4)
No No
GTX 3000 Yes Yes Yes
Table 1-2 Configuration Options
Model
Number
Garmin Part
Number
Applicable
TSO
Traffic
Advisory
System
(TAS)
Traffic
Alert and
Collision
Avoidance
System
(TCAS I)
Traffic
Alert and
Collision
Avoidance
System
(TCAS II)
1090 ES
ADS-B
Receiver
Transmit
Power
(Watts)
GTS 825 011-02571-00 TSO-C147 X X 400
GTS 855* 011-02571-00 TSO-C118 X X 400
GTS 8000* 011-02571-00 TSO-C119c X X 400
DRAFT