User's Manual
Table Of Contents
- Preface
- Basic Operation
- Getting Started
- Main Pages
-  Where to
-  Favorites
-  Travel Kit
- Using Bluetooth® Technology
- Using FM Traffic
- Using the FM Transmitter
- Managing Files on Your nüvi
- Customizing the nüvi
- Appendix
- Updating the nüvi Software
- Purchasing and Loading Additional Map Data
- Using Safety Cameras
- Custom POIs (Points of Interest)
- Optional Accessories
- About GPS Satellite Signals
- Mounting the nüvi on Your Dashboard
- Removing the nüvi and the Mount
- Removing the Cradle from the Mount
- Caring for Your nüvi
- Battery Information
- Troubleshooting
- Declaration of Conformity
- Software License Agreement
- Technical Specifications
- Index
nüvi 610/660 Owner’s Manual 53
APPENDIX
Mounting the nüvi on Your Dashboard
Use the enclosed mounting disk to mount your nüvi to the dashboard.
Important: The permanent mounting adhesive is extremely difficult to remove after
it is installed.
To install the
mounting disk:
Disk
Suction
cup mount
Suction
lever
1. Clean and dry the dashboard where you want
to place the disk.
2. Remove the backing from the permanent
mounting adhesive on the bottom of the
disk, and place the disk on the
dashboard.
3. Place the suction cup mount on top of the disk.
4. Flip the suction lever down to secure the suction cup mount to the disk.
Removing the nüvi and the Mount
1. To remove the nüvi, press up on the tab on the bottom of the cradle.
2. Lift the nüvi off of the mount.
3. To remove the suction cup from the windshield, flip the lever toward you.
4. Pull the tab on the suction cup toward you.
Removing the Cradle from the Mount
To remove the cradle from the mount arm, turn the cradle to one side. The cradle
snaps off of the ball socket. To replace the cradle, snap the cradle on the ball socket.