User's Manual
Table Of Contents
- Preface
- Basic Operation
- Getting Started
- Main Pages
-  Where to
-  Favorites
-  Travel Kit
- Using Bluetooth® Technology
- Using FM Traffic
- Using the FM Transmitter
- Managing Files on Your nüvi
- Customizing the nüvi
- Appendix
- Updating the nüvi Software
- Purchasing and Loading Additional Map Data
- Using Safety Cameras
- Custom POIs (Points of Interest)
- Optional Accessories
- About GPS Satellite Signals
- Mounting the nüvi on Your Dashboard
- Removing the nüvi and the Mount
- Removing the Cradle from the Mount
- Caring for Your nüvi
- Battery Information
- Troubleshooting
- Declaration of Conformity
- Software License Agreement
- Technical Specifications
- Index
nüvi 610/660 Owner’s Manual 57
APPENDIX
My phone will not connect to
the nüvi.
Verify that the Bluetooth field is set to Enabled.
Make sure your phone is turned on and is less
than 10 meters (about 33 feet) away from your
nüvi.
See www.garmin.com/bluetooth for more help.
How do I know my nüvi is in
USB Mass Storage Mode?
When your nüvi is in USB Mass Storage Mode,
a picture of a nüvi connected to a computer is
shown on the nüvi. Also, you should see a new
removable disk drive listed in My Computer.
My computer never senses
that the nüvi is connected.
1. Unplug the USB cable from your computer.
2. Turn the nüvi off and then back on again.
3. Plug the USB cable into your computer.
The nüvi automatically goes into USB
Mass Storage Mode.
The nüvi cannot communicate with Windows
®
95,
Windows 98, or Windows Me.
I cannot find any drives
named “nüvi” in my list of
drives.
Try the solution listed above.
If you have several network drives mapped
on your computer, Windows may have trouble
assigning drive letters to your nüvi drives. Follow
the steps on the following page to assign your
drive letters.