User's Manual

D R A F T
Edge 800 Owner’s Manual 27
ANT+ Sensors
to www.garmin.com/intosports.
Pairing Your Power Meter
Refer to the manufacturer’s
instructions.
When the power meter is paired,
a message appears, and the
power icon appears solid on the
status page.
Calibrating Your Power Meter
For calibration instructions specic
to your power meter, refer to the
manufacturer’s instructions.
Before you can calibrate your power
meter, it must be properly installed and
actively recording data.
1. Select MENU > > Bike
Settings > Bike Proiles.
2. Select a bike prole.
3. Selec ANT+ Power > Calibrate.
4. Keep your power meter active by
pedaling until a message appears.
Viewing Your Power Zones
You can set seven custom power zones
using Garmin Connect or Garmin
Training Center. If you know your
FTP (functional threshold power)
value, you can enter it and allow the
software to calculate your power zones
automatically.
1. Press and hold MENU.
2. Select Settings > Bike Settings >
[Bike 1] > Power Zones.
Non-Zero Averaging for Power
Data
The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select MENU > > Bike
Settings > Data Averaging > Power.