User's Manual

D R A F T
Edge 800 Owner’s Manual 47
Settings
Data Recording Settings (see
History, page xx)
Unit Settings (page 48)
System Setup (page 48)
Conguration Settings (page 49)
Weight Scale Settings (page 49)
GPS Settings
Training Indoors
1. Select MENU > > System >
GPS > GPS Mode.
2. Select Off.
When GPS is off, speed and distance
data are not available unless you have
an optional sensor that sends speed and
distance data to the Edge (such as the
GSC 10. The next time you turn on the
Edge, it will search for satellite signals
again.
Setting Your Current Elevation
If you have accurate elevation data
for your current location, you can
manually calibrate the altimeter on
your device.
1. Select MENU > > System >
GPS > Set Elevation.
2. Enter the elevation.
Satellite Page
The satellite page shows your current
GPS satellite information. Select
MENU > > System > GPS > View
Satellites.
On the satellite page, GPS accuracy
appears at the bottom of the page.
The green bars represent the strength
of each satellite signal received (the
number of the satellite appears below
each bar).
For more information about GPS, go to
www.garmin.com/aboutGPS.