nüLink!™ quick start manual 190-01287-01_01.
Getting Started Connecting the Device to Vehicle Power ‹ WARNING S ee the Important Safety and Product ‹ WARNING Information guide in the product This product contains a lithium-ion box for product warnings and other battery. To prevent the possibility of important information. personal injury or product damage caused by battery exposure to extreme When using your device for the first heat, remove the device from the time, complete these tasks. vehicle when exiting or store it out of 1.
. Plug the vehicle power cable into the mini-USB connector ➊ on the mount ➋. Mounting Your Device ➋ ➊ 4. Plug the other end of the vehicle power cable into a power outlet in your vehicle. After the device has been connected to vehicle power, the following actions occur. nüLink! Quick Start Manual 190-01287-01_01.indd 3 • The device turns on. • The device acquires satellite signals. When at least one of the bars is green, your device has acquired satellite signals.
2. Clean and dry your windshield and the suction cup with a lint-free cloth. 3. Press the suction cup to the windshield. 4. While pressing, flip the lever back toward the windshield. 5. Snap the mount ➊ onto the suction cup arm ➋. ➊ ➋ About myDashboard Use myDashboard to register your device, check for software and map updates, access product manuals and support, and more. Setting Up myDashboard 1. Connect the USB cable to the micro-USB connector on the device. 2.
2. Follow the on-screen instructions. 3. Keep the original sales receipt, or a photocopy, in a safe place. Updating the Software 1. Open myDashboard (page 4). 2. Register the device (page 4). 3. Under Software Updates, click Update Now. 4. Follow the on-screen instructions. nüMaps Guarantee™ Your device is eligible for one free map update within 60 days of acquiring satellites while driving with your device.
Device Overview ➊ ➋ Adjusting the Screen Brightness 1. Touch Tools > Settings > Display > Brightness. 2. Touch and move the scroll bar to adjust screen brightness. About Points of Interest ➊ Power key ™ ➋ microSD card slot Turning the Device On and Off 1. Hold the Power key for four seconds. 2. Touch Off. Resetting the Device You can reset your device if it stops functioning. Press and hold the power key for 10 seconds. 6 190-01287-01_01.
You can select > Save on this page to save the location to a Favorites folder on the device. Use the Favorites folder to save the location of your workplace, home, and other common destinations. 6. If necessary, select an option. • Select Drive to calculate a route you will navigate by driving. • Select Walk to calculate a route you will navigate by walking. • Select Public Transit to calculate a route that combines public transit and walking.
About the Main Menu Toolbar Following Your Route on the Map Icon NOTICE The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Description GPS signal status. Select and hold to view satellite information.
icon could appear as you travel on major roadways. ➊ Select to view the next turn. If a view of the junctions exists, the junction view appears. ➋ Select to view the turn list. ➌ Select to zoom in and out. ➍ Select to return to the main menu. Select and hold from any screen to return to the main menu. ➎ Select to change the data field. ➏ Select to view the Where Am I? page. ➐ Select and drag to view a different area of the map. ➑ Select to view the trip computer.
About nüLink! Services About Traffic nüLink! services may not be available NOTICE in all areas or countries. Garmin is not responsible for the accuracy or timeliness of the traffic Your nüLink! includes a basic information. nüLink! subscription, which is activated when you first turn on your Traffic information may not be device. nüLink! services allow you available in all areas or countries.
Pairing Your Phone About Sleep Mode 1. Enable the Bluetooth® component on your phone. 2. From the main menu, select Tools > Settings > Bluetooth. 3. Select Bluetooth > Enabled > Save. 4. Select Add Phone > OK. 5. Select your phone, and select OK. 6. Enter the Bluetooth PIN (1234) for your device in your phone. Entering and Exiting Sleep Mode • To cause the device to enter sleep mode, press the Power key to put the device in sleep mode.
Finding More Information You can find more information about this product on the Garmin Web site. • Go to www.garmin.com /ontheroad. • Go to http://buy.garmin.com to purchase accessories. • Select Tools > Help. Contacting Garmin Product Support Contact Garmin Product Support if you have any questions about this product: • In the USA, go to www .garmin.com/support, or call Garmin USA at (800) 800.1020. • In the UK, call Garmin (Europe) Ltd. at 0808 2380000. December 2010 190-01287-01_01.
