Charging the A03071 Device NOTICE To prevent corrosion, thoroughly dry the contacts on the A03071 device and the surrounding area before connecting the charging clip. You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery takes about two hours. 1 Snap the device À onto the charging clip Á. Turning On the A03071 Device Hold the power key until the status LED turns green and the device beeps.
Mounting Location Considerations 4 Plug the small end of the power cable into the port on the base unit. • The A03070 unit should be approximately 1.5 m (5 ft.) above the ground when mounted. • The A03070 unit should be near a power source. • The A03070 unit should be away from metal structures, appliances, microwaves, and wireless routers for ideal operation. • You must leave enough cable length to reach the power source. To purchase a longer accessory cable, go to 5 Slide the base unit into the mount.
• • • • Device Information A03070 and A03071 Device Specifications Operating From -20 to 60 C (from temperature range -4 to 140 F) Charging From 0 to 45 C (from temperature range 32 to 113 F) . 14 Support and Updates • You can update software and maps for your A03070 device using Garmin Express™. • You can update software for your A03071 device using Garmin WebUpdater.
Getting the Owner's Manual The owner's manual includes instructions for using device features and accessing regulatory information. Go to garmin.
support.garmin.com © 2017 Garmin Ltd. or its subsidiaries Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. . These trademarks may not be used without the express permission of Garmin.