A03110 Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started............................................................... 1 Installing the Memory Card ......................................................... 1 Device Overview ......................................................................... 1 Installing the Mount onto Your Windshield ................................. 1 Installing and Setting Up ..................................... 1 Setting and Placement...................................................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Installing the Memory Card TIP: You can connect the device to power and hold the device in the preferred mounting location to check the camera's field of view at that location. 1 Clean the windshield using water or alcohol, and a lint-free cloth. The windshield must be free of dust, wax, oils, or coatings.
Setup: Allows you to set the units of measure, time, and language, and restore them to their default values. About: Displays the software version number, the unit ID number, and information about several other software features. Regulatory: Displays regulatory and compliance information. Device Setup NOTICE Deleted or overwritten files cannot be restored. Select > Settings > System > Setup. Units: Sets the unit of measure used for distances. Time: Sets the time, date, and format for the time stamp.
TIP: You may need to use a coin to remove the end piece. 2 Remove the end piece, the silver tip Á, and the fuse Â. 3 Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A. 4 Place the silver tip in the end piece. 5 Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable Ã.
support.garmin.