BC™ 40 WIRELESS BACKUP CAMERA Quick Start Manual
Getting Started and slide the mount up or down to align one set of mounting holes with the holes in the license plate. You should use the mounting position that fits your vehicle and covers the smallest portion of the license plate. You must avoid covering any text or numbers on the license plate. Some jurisdictions prohibit covering any portion of the license plate. It is your responsibility to follow license plate mounting regulations.
at the bottom of your license plate, you should use lithium batteries, which provide must remove, rotate, and reattach the extended battery life and better camera clip. This allows you to properly performance at low temperatures. adjust the camera angle. 1 Rotate both battery covers À toward the front of the camera, and remove 1 Using a Phillips screwdriver, fully loosen the two camera clip screws À, the battery covers. and remove the camera clip Á from the metal bracket.
Viewing the Backup Camera After you pair your camera with a compatible Garmin navigation device, the camera view appears automatically when you turn on your navigation device, and you can manually show the camera at any 2 Press the other side into the mount until it clicks. time. • If your navigation device is connected 3 Pull gently on the camera to verify both sides are locked into the mount. to an ignition-switched power outlet (recommended), turn on your vehicle.
6 7 8 View the camera using your Garmin navigation device (page 4), and verify the camera angle. When the camera is angled correctly, the bottom edge of the video frame should align with the rearmost part of the vehicle, such as the bumper or trailer hitch. Objects above the horizon should appear in the top one-quarter to one-third of the frame. If necessary, repeat this procedure until the camera angle is correct. WARNING After you adjust the camera angle, you must align the guidance lines (page 5).
Specifications Battery Type 2 removable AA. Lithium recommended. Camera and transmitter waterproof rating IEC 60529 IPX6/7 Operating temperature range From -20° to 70°C (from -4° to 158°F) Wireless frequencies/ protocols Wi‑Fi 2.4 GHz @ +13dBm nominal Bluetooth 2.
support.garmin.com © 2018 Garmin Ltd. or its subsidiaries Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BC™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
