Installation Instructions

ManualsBrandsGarmin International ManualsElectronicsLow Power Transmitter

Table Of Contents

VIEO

™

RV 51/52

INSTALLATION

INSTRUCTIONS

Important Safety Information

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

NOTICE

Failure to follow these cautions could result in damage to the

vehicle or poor product performance.

This device must be installed according to these instructions.

Disconnect the vehicle's power supply before beginning to install

this product.

Before applying power to this product, make sure it has been

correctly grounded according to the installation instructions.

You must read all installation instructions before beginning the

installation. If you experience difficulty during the installation,

contact Garmin

Product Support.

Connector Identification

Connector Identification (Vieo RV 51)

Item Label Description Connector Details

ZONE 1

LINE OUT

Line out

connectors for

zone 1

Left (white), right (red), and

subwoofer (orange)

RCA connectors

ZONE 2

LINE OUT

Line out

connectors for

zone 2

Left (white), right (red), and

subwoofer (orange)

RCA connectors

None Wiring harness

connectors

Connects to the included and

optional wiring harnesses

None AM/FM antenna

connector

Connects to either the vehicle's

AM/FM antenna cable or an

inline adapter attached to the

vehicle's AM/FM antenna cable

SiriusXM SiriusXM

port Connects to a compatible

SiriusXM Connect vehicle tuner

and antenna (sold separately)

USB (500 mA) Reserved for manufacturer use

Compatible only with low-

current (<500 mA) USB devices

iPhone/iPod USB (1 A) Interfaces with and charges

supported smartphones and

USB devices

Item Label Description Connector Details

AUX 1

INPUT

Auxiliary input 1 Left (white) and right (red) RCA

connectors

CAMERA

AUDIO

INPUT/AUX

2 INPUT

Input for camera

audio or for

auxiliary 2

Left (white) and right (red) RCA

connectors

None RJ-45 Supports Ethernet connectivity

CAN 1 CAN BUS 1 Connects to RV control systems

using an adapter (sold

separately)

CAN 2 CAN BUS 2 Reserved for vehicle integration

Connects to supported chassis

CAN systems using an adapter

cable to support steering wheel

controls

VIDEO IN Analog camera

video input

4 RCA video connectors

Connects to up to four vehicle

cameras, including forward, left

view, right view, and backup

cameras

MIC Microphone input 3.5 mm mono microphone port

Connects to the included

microphone for hands-free

calling

Connector Identification (Vieo RV 52)

Item Label Description Connector Details

ZONE 1

LINE OUT

Line out

connectors for

zone 1

Left (white), right (red), and

subwoofer (orange)

RCA connectors

ZONE 2

LINE OUT

Line out

connectors for

zone 2

Left (white), right (red), and

subwoofer (orange)

RCA connectors

None Wiring harness

connectors

Connects to the included,

optional wiring harnesses

AM/FM/DAB AM/FM/DAB

connector (default

source)

Connects to a compatible

antenna. Must be used for AM

band (default)

FM/DAB Connector for

alternate FM, FM

and DAB, or DAB

antenna

Connects to a dedicated FM,

FM and DAB, or DAB antenna

if reception is not covered by

the AM/FM/DAB antenna

(requires menu reconfiguration)

USB (500 mA) Reserved for manufacturer use

Compatible only with low-

current (<500 mA) USB

devices

iPhone/iPod USB (1 A) Interfaces with and charges

supported smartphones and

USB devices

AUX 1

INPUT

Auxiliary input 1 Left (white) and right (red) RCA

connectors

GUID-4F264AA7-30E5-4F0C-AD74-0C8DE09EE764 v1March 2020

Summary of content (6 pages)

PAGE 1
Item Label VIEO RV 51/52 INSTALLATION INSTRUCTIONS ™ Important Safety Information WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. NOTICE Failure to follow these cautions could result in damage to the vehicle or poor product performance. This device must be installed according to these instructions. Disconnect the vehicle's power supply before beginning to install this product.
PAGE 2
Item Label Description Connector Details Wire Color Function CAMERA AUDIO INPUT/AUX 2 INPUT Input for camera audio or for auxiliary 2 Left (white) and right (red) RCA connectors Gray Speaker zone 1 right (+) Gray/black Speaker zone 1 right (-) None RJ-45 Supports Ethernet connectivity Green CAN 1 CAN BUS 1 Connects to RV control systems using an adapter (sold separately) Speaker zone 2 left (+) Green/black Speaker zone 2 left (-) CAN 2 CAN BUS 2 Reserved for vehicle integration Connect
PAGE 3
2 Using the included screws Wire color Pin Function Notes Brown 7 Front camera trigger Connects to an analog high signal to trigger the device to display the front camera. Black 9 Camera trigger Ground wire for the camera trigger ground inputs. Connecting Vehicle and Backup Cameras You can connect up to four analog vehicle cameras to the infotainment system for backup, left, right, and front cameras. 1 For each camera, route the camera's RCA analog video cable to the back of the stereo.
PAGE 4
The wall-mount bracket includes the hardware required to attach the dock to a wooden surface. If you are mounting the device on a different material, you should use suitable hardware for your mounting surface. 1 Place each bracket on the dock , aligning the holes in the bracket with the holes on the dock. 2 Using the included screws , secure each bracket to the sides of the dock. The recommended torque you should apply to the screws is 5.0 to 6.0 lbf-in. (0.56 to 0.68 N-m).
PAGE 5
Dock Specifications Operating temperature range From -10 to 55°C (from 14 to 131°F) Storage temperature range From -20 to 70°C (from -4 to 158°F) Input voltage From 10.8 to 16 Vdc Current (max.) 15 A Current (standby mode) Less than 5 mA Fuse 15 A mini blade type Wireless frequency/protocol 2.4 GHz @ 7.9 dBm nominal On-board, Class D Amplifier Output music power per channel 4 x 70 W max. 2 ohm Total output peak power 280 W max. Output power per channel 4 x 43 W RMS at 14.