Specification Control Document Drawing Number: Description: Revision: Drawn By: 190-01978-93 GPSMAP 8400/8600 Installation Instructions (EN/FR) E MEH 12/29/15 Revision History Rev. C D E Date 04/01/16 09/23/16 11/30/20 Description of Change Updated J1939 and Specifications Corrected Missing Glyphs Various updates, WCAG ECO No. 141402 148636 215605 Printing Specifications Tolerance: Material: Color: Bindery: Folds: Trimmed Dimensions: Finished Dimensions: Notes: ±0.0787" (±2 mm) 70-lb woodfree.
GPSMAP 8X17/8X22/8X24 ® Installation Instructions Instructions d'installation 2 9 Garmin , the Garmin logo, and GPSMAP are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. ® ® NMEA , NMEA 2000 , and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. HDMI is a registered trademark of HDMI Licensing, LLC.
GPSMAP 8x17/8x22/8x24 Installation Instructions ® USB Micro-USB to connect a compatible Garmin card reader, or to connect and control a computer using the chartplotter touchscreen NMEA 2000 NMEA 2000 network ® Important Safety Information ENGINE/J1939 J1939 engine network WARNING Failure to follow these warnings, cautions, and notices could result in personal injury, damage to the vessel or device, or poor product performance.
• • • 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 You can drill pilot holes and use the included wood screws. You can drill holes and use the included nut plates and machine screws. The nut plates can add stability to a thinner surface. You can punch holes, tap them to M4, and use the included machine screws. Trim the template and make sure it fits in the location where you want to mount the device. Secure the template to the selected location. Using a 3.6 mm (9/64 in.
Item NMEA 2000 Considerations Description Fuse NOTICE If you are connecting to an existing NMEA 2000 network, identify the NMEA 2000 power cable. Only one NMEA 2000 power cable is required for the NMEA 2000 network to operate properly. A NMEA 2000 Power Isolator (010-11580-00) should be used in installations where the existing NMEA 2000 network manufacturer is unknown. If you are installing a NMEA 2000 power cable, you must connect it to the boat ignition switch or through another in-line switch.
• • • • • • The internal NMEA 0183 ports and communication protocols are configured on the connected Garmin device. See the NMEA 0183 section of the chartplotter owner's manual for more information. The ground wires on the NMEA 0183 data cable and your NMEA 0183 device must both be connected to ground. When connecting NMEA 0183 devices with two transmitting and two receiving wires, it is not necessary for the NMEA 0183 devices to connect to a common ground.
Item Description Power source Power cable Horn Lamp NMEA 0183 cable Relay (100 mA coil current) Toggle switches to enable and disable lamp or horn alerts Item Wire Color Wire Function Red Power Black Ground Yellow Alarm HDMI video is shared across the Garmin Marine Network, but it is not shared across the NMEA 2000 network. HDCP content is not shared across the Garmin Marine Network.
The Garmin USB accessory cable (010-12390-10) is 4.5 m (15 ft) long. If you need a longer cable, you should use a USB hub or USB repeater extension cable only. You must make all cable connections in a dry environment. Specification Measurement Typical current draw at 12 Vdc 3.9 A Typical current draw at 24 Vdc 1.8 A Max. current draw 4.9 A Compass-safe distance Device: 68.58 cm (27 in.) Device and sun cover: 111.76 cm (44 in.) Sun cover: 43.18 cm (17 in.
Transmit Sentence Description PGN Description PGRMM M: Map datum 126464 Transmit and receive PGN list group function PGRMZ Z: Altitude 126984 Alert Response SDDBT DBT: Depth below transducer 127497 Trip parameters: Engine SDDPT DPT: Depth SDMTW MTW: Water temperature SDVHW VHW: Water speed and heading Receive PGN Description 065030 Generator average basic AC quantities (GAAC) Receive 126983 Alert Sentence Description 126985 Alert text DPT Depth 126987 Alert threshold DB
GPSMAP 8x17/8x22/8x24 Instructions d'installation ® POWER Alimentation NETWORK Réseau Garmin Marine Network HDMI IN Entrée HDMI Informations importantes relatives à la sécurité HDMI OUT Sortie HDMI AVERTISSEMENT Le non-respect de ces avertissements, avis et mises en garde est susceptible de provoquer des blessures, d'endommager le bateau et l'appareil ou de dégrader les performances du produit.
Installation de l'appareil La partie surélevée de la platine doit s'ajuster dans le grand trou. AVIS Faites attention lorsque vous percez le trou pour encastrer l'appareil. Le dégagement entre le boîtier et les trous de fixation est très réduit et en perçant un trou trop grand, vous risquez de compromettre la stabilité de l'appareil après son installation. Pour éviter d'endommager le revêtement, utilisez les vis fournies pour fixer l'appareil. Si vous utilisez d'autre vis, la garantie est nulle.
Considération relative à la mise à la masse supplémentaire Dans la plupart des conditions d'installation, cet appareil ne devrait pas nécessiter de mise à la masse supplémentaire du châssis. En cas d'interférence, vous pouvez utiliser la vis de mise à la masse sur le boîtier pour raccorder l'appareil à la terre du bateau et résoudre ainsi le problème.
Tx). Vous pouvez raccorder un appareil NMEA 0183 par port Rx interne pour entrer des données sur votre appareil Garmin et jusqu'à trois appareils NMEA 0183 en parallèle sur chaque port Tx interne pour recevoir les données sorties par votre appareil Garmin. NMEA Connexion d'un appareil NMEA 0183 Ce diagramme illustre la connexion bidirectionnelle pour les données transmises et reçues. Vous pouvez aussi suivre ce diagramme pour les connexions unidirectionnelles.
Port Fonction du fil Couleur du fil Port de sortie 1 Tx/B (sortie -) Numéro de broche Élément Couleur du fil Fonction du fil Rose Rouge Alimentation Terre Alarme Port d'entrée 2 Rx/A (entrée +) Marron Noir Port d'entrée 2 Rx/B (entrée -) Blanc/marron Jaune Port de sortie 2 Tx/A (sortie +) Bleu Port de sortie 2 Tx/B (sortie -) Blanc/bleu Port d'entrée 3 Rx/A (entrée +) Violet Port d'entrée 3 Rx/B (entrée -) Blanc/violet Port d'entrée 4 Rx/A (entrée +) Blanc/noir Port d'entr
Pour alimenter une clé multimédia, vous devez utiliser un câble adaptateur USB OTG Garmin GPSMAP. Le port USB peut alimenter une clé multimédia à hauteur de 2,5 W. Veillez à effectuer vos branchements à l'abri de l'humidité.
Caractéristique Détail Emettre Consommation constatée maximale 4,9 A PGN Description Distance de sécurité du compas Appareil : 68,58 cm (27 po) Appareil et pare-soleil : 111.76 cm (44 po) Pare-soleil : 43.
Expression Description Description PGN SPN PGRMM M : système géodésique Niveau de carburant 65276 96 PGRMZ Z : altitude Pression différentielle du filtre à huile du moteur 65276 969 SDDBT DBT : profondeur sous la sonde SDDPT DPT : profondeur SDMTW MTW : température de l'eau SDVHW VHW : vitesse surface et cap Réception Expression Description DPT Profondeur DBT Profondeur sous la sonde MTW Température de l'eau VHW Vitesse surface et cap WPL Position du waypoint DSC Informati
Part Information: GPN: Description: Part Type: Lifecycle Phase: Rev: 190-01978-93 GPSMAP 8400/8600 Installation Instructions (EN/FR) Manuals / Printed Literature Production E ECO#215605 Item Attribution: Document Review Required: Item Notes: ESD Sensitive: Moisture Sensitive: Limited Shelf Life: Magnetic Sensitive: Part Approval Requirements: Additional Requirements: Compliance Requirement: RoHS Requirement: (-00) This part shall comply with Garmin Banned & Restricted Substances document 001-00211-00.