User Manual
22 Edge 500 Owner’s Manual
ANT+ Sensors
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the heart rate monitor.
3. Press and hold MENU.
4. Select Settings > Bike Settings >
Heart Rate > ANT+ HR.
5. Select Yes > Rescan.
6. Press BACK to return to the main
menu.
When the heart rate monitor is
paired, a message appears and the
heart rate icon appears on the
main menu.
7. Customize optional data elds
(page 36).
8. Go for a ride.
TIP: If heart rate data does not appear
or if you have erratic heart rate data,
you may have to tighten the strap on
your chest or warm up for 5 to 10
minutes (see page 31).
The Edge uses your user prole
information from the initial setup to
determine your heart rate zones.
1. Press and hold MENU.
2. Select Settings > Bike Settings >
Heart Rate > HR Zones.
NOTE: You can customize your
maximum heart rate, resting heart rate,
and heart rate zones using Garmin
Connect (page 8).