Edge Touring ® Owner’s Manual June 2013 190-01605-00_0C Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin®, the Garmin logo, and Edge® are trademarks of Garmin Ltd.
Table of Contents Introduction.................................................................... 1 Getting Started ........................................................................... 1 Charging the Device .................................................................. 1 About the Battery .................................................................. 1 Installing the Standard Mount .................................................... 1 Turning On the Device ..................................
Introduction WARNING Always consult your physician before you begin or modify any exercise program. 1 Select a secure location to mount the Edge where it does not interfere with the safe operation of your bike. 2 Place the rubber disk À on the back of the bike mount. The rubber tabs align with the back of the bike mount so it stays in place. Getting Started When using your device the first time, you should complete these tasks to set up the device and learn about the basic features.
Home Screen Overview The home screen gives you quick access to all the features of the Edge. Where To? Searches for a location or route. View Map Shows the map. Opens the device history. Opens the setup menu. Using the Touchscreen • When the timer is running, tap the screen to view the timer overlay. The timer overlay allows you to use the settings and search features during a ride. • Select to save your changes and close the page. • Select to close the page and return to the previous page.
Navigating to a Point of Interest You can search for specific types of locations. 1 From the home screen, select Where To? > Search Tools > POI Categories. Select a category. 2 3 Select a point of interest. 4 Select RIDE. Setting the Search Location By default, the device searches for points of interest, saved locations, and saved routes near your current location. You can set the device to search near a different location. 1 From the home screen, select Where To? > . 2 Select a search area.
When the heart rate monitor is paired with your device, the sensor status is Connected. Pairing an eBike 1 Bring the device within range (3 m) of the eBike. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Select > eBike > Enable > Search. When the eBike is paired with your device, the sensor status is Connected. TIP: You can select eBike Details to view information stored on the paired eBike computer, such as the odometer and battery life.
3 Plug the large end of the USB cable into a computer USB port. 4 Go to www.garminconnect.com/start. 5 Follow the on-screen instructions. Garmin Connect Garmin Connect gives you a simple way to store and track your activities, analyze your data, and share with others. To sign up for a free account, go to www.garminconnect.com/start. Store your activities: After you complete and save an activity with your device, you can upload that activity to Garmin Connect and keep it as long as you want.
Backlight Timeout: Adjusts the length of time before the backlight turns off. Color Mode: Sets the device to display day or night colors. You can select Auto to allow the device to automatically set day or night colors based on the time of day. Screen Capture: Allows you to save the image on the device screen. Changing the Start Notice This feature automatically detects when your device has acquired satellites and is moving. It is a reminder to start the timer so you can record your ride data.
Appendix Saving Energy While Charging the Device You can turn off the device display and all other features while charging. 1 Connect your device to an external power source. The remaining battery capacity appears. 2 Hold the power key for 4 to 5 seconds. The display turns off, and the device goes into a low power, battery charging mode. 3 Charge the device completely. Clearing User Data You can restore all of the device settings to the factory default values.
Time of Day: The current time of day based on your current location and time settings (format, time zone, daylight saving time). Time to Dest.: The estimated time remaining before you reach the destination. You must be navigating for this data to appear. Time to Next: The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear. Total Ascent: The total elevation distance ascended since the last reset.
Index A accessories 7 ANT+ sensors 3 Auto Lap 5 B backlight 1, 2, 5, 7 battery charging 1, 7 maximizing 7 type 1 brightness 7 C charging 7 charging the device 1 cleaning the device 6 compass, settings 5 computer, connecting 4 courses creating 3 navigating 3 settings 3 customizing the device 5 D data storing 5 transferring 4, 5 data fields 5, 7 data recording 6 deleting all user data 4, 7 history 4 device care 6 registration 7 resetting 6 display settings 5 E eBike 4 elevation, settings 5 F files, tran
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230 +32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99 +49 (0)180 6 427646 + 39 02 36 699699 0800 - 023 3937 035 - 539 3727 + 47 815 69 555 00800 4412 454 +44 2380 662 915 + 35 1214 447 460 + 34 93 275 44 97 + 46 7744 52020 Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
