Product Manual

Using Auto Scroll
You can use the Auto Scroll feature to automatically cycle
through all of the training data screens while the timer is
running.
1
Select > Activity Settings.
2
Select Auto Features > Auto Scroll.
3
Select a display speed.
Changing the Start Notice
This feature automatically detects when your device has
acquired satellites and is moving. It is a reminder to start the
timer so you can record your ride data.
1
Select > Activity Settings.
2
Select Start Notice.
3
Select an option:
• Select Once.
• Select Repeat > Repeat Delay to change the amount of
time to delay the reminder.
System Settings
Select > System.
• GPS Settings (GPS Settings, page 12)
• Color Settings (Changing the Accent Color, page 12)
• Display Settings (Display Settings, page 12)
• Incident Detection Settings (Turning Incident Detection On
and Off, page 5)
• Data Recording Settings (Changing the Data Storage
Location, page 7)
• Unit Settings (Changing the Units of Measure, page 12)
• Tone Settings (Setting the Device Tones, page 12)
• Language Settings (Changing the Device Language,
page 12)
GPS Settings
Changing the Satellite Setting
For increased performance in challenging environments and
faster GPS position location, you can enable GPS and
GLONASS. Using GPS and GLONASS reduces battery life
more quickly than using only GPS.
1
Select > System > GPS > GPS Mode.
2
Select an option.
Setting Your Elevation
If you have accurate elevation data for your present location,
you can manually calibrate the altimeter on your device.
1
Select > System > GPS > Set Elevation.
2
Enter the elevation, and select .
Viewing Satellites
The satellite page shows your current GPS satellite information.
For more information about GPS, go to www.garmin.com
/aboutGPS.
Select > System > GPS > View Satellites.
GPS accuracy appears at the bottom of the page. The green
bars represent the strength of each satellite signal received (the
number of the satellite appears below each bar).
Changing the Accent Color
You can change the accent color on the device.
1
Select > System > Color.
2
Select an accent color.
Display Settings
Select > System > Display.
Auto Brightness: Automatically adjusts the backlight brightness
based on the ambient light.
Backlight Timeout: Sets the length of time before the backlight
turns off.
Color Mode: Sets the device to display day or night colors. You
can select Auto to allow the device to automatically set day or
night colors based on the time of day.
Orientation: Sets the device to display in portrait or landscape
mode.
Screen Capture: Allows you to save the image on the device
screen.
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, temperature, weight, position format, and time format.
1
Select > System > Units.
2
Select a measurement type.
3
Select a unit of measure for the setting.
Setting the Device Tones
Select > System > Tones.
Changing the Device Language
Select > System > Language.
Changing the Configuration Settings
You can modify all of the settings you configured in the initial
setup.
1
Select > System > Device Reset > Initial Setup.
2
Follow the on-screen instructions.
Time Zones
Each time you turn on the device and acquire satellites or sync
with your smartphone, the device automatically detects your
time zone and the current time of day.
Device Information
Specifications
Edge Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life 15 hours, typical usage
Operating temperature
range
From -20º to 60ºC (from -4º to 140ºF)
Charging temperature
range
From 0º to 40ºC (from 32º to 104ºF)
Radio frequency/
protocol
2.4 GHz ANT+ wireless communications
protocol
Bluetooth Smart wireless technology
Wi‑Fi wireless technology
Water rating IEC 60529 IPX7*
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Remote Specifications
Battery type User-replaceable CR2032 (3 V)
Battery life Up to 1.5 yr. (1 hr./day)
Operating temperature
range
From -10° to 50°C (from 14° to 122°F)
Radio frequency/protocol 2.4 GHz ANT+ wireless communications
protocol
Water rating 5 ATM*
12 Device Information