Manual

Table Of Contents
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Do not use chemicals, alcohol, solvents, or other cleaners to
clean the camera.
1
Wipe the outer casing and lens with a clean, dry, non-
scratch, lint-free cloth.
2
If the dry cloth does not fully clean the camera, remove the
camera battery, and lightly dampen the cloth with a small
amount of water.
NOTICE
The camera is not water resistant. Use only a very small
amount of water. Verify the camera is off and the battery is
removed before using a damp cloth to clean it. Avoid using a
damp cloth near the ports and keys.
3
Allow the camera to dry fully before you replace the battery or
turn it on.
Caring for the Removable Camera Case
NOTICE
Failure to perform proper care and maintenance may cause
damage to the removable camera case or gasket and allow
water to leak into the case during use. Exposing the camera to
water will cause permanent damage to the camera and battery,
which may present a risk of fire, chemical burn, electrolyte leak,
and/or injury.
Do not expose the camera or battery to water or other liquids.
These care instructions apply only to the removable camera
case.
You must follow these steps after each use to help preserve the
water protection, lens clarity, and mechanical functions of the
removable camera case.
1
Remove the camera case from the camera.
2
Carefully remove the gasket from the camera case door.
3
Thoroughly rinse the camera case and gasket with fresh
water.
This is especially important when the camera case has been
exposed to salt water, chlorine, or other chemicals. Extended
exposure to chemicals may damage the case, including
fogging of the case and lens, and corrosion of the hinge and
latch materials.
4
Verify the gasket and gasket groove are free of debris.
Even very small debris can prevent the gasket from sealing
properly and compromise the waterproof seal.
5
Replace the gasket onto the camera case door, and verify
the gasket is seated fully into the groove.
6
Allow the case to air dry.
You should not dry the case or gasket with a cloth. Lint or
debris from the cloth may compromise the waterproof seal.
Support and Updates
Garmin Express
(garmin.com/express) provides easy access
to these services for Garmin devices.
Product registration
Product manuals
Software updates
Data uploads to Garmin Connect
Connecting the Device to Your Computer
Before you can connect the device to your computer, you may
need to remove optional mount accessories.
1
Plug the small end of the USB cable into the USB port
À
on
the device.
2
Plug the large end of the USB cable into a computer USB
port.
3
If the camera is off, hold POWER to turn on the camera.
The camera enters USB mass storage mode. Your memory
card appears as a removable drive in My Computer on
Windows computers and as a mounted volume on Mac
computers.
File Types
The device supports or creates these file types.
File extension Description
.jpeg Photo file
.mp4 Full-resolution video file
.glv Low-resolution video file (for on-device playback)
.thm Video or photo thumbnail file
.fit G-Metrix data file
Specifications
Battery type Rechargeable lithium-ion battery
Operating temperature
range (battery power)
From -15º to 45ºC (from 5º to 113ºF)*
Operating temperature
range (external power)
From -20º to 45ºC (from -4º to 113ºF)*
Charging temperature range From 0º to 45°C (from 32º to 113°F)
Storage temperature range From 0º to 25ºC (from 32º to 77ºF)
Input voltage 5 Vdc, 1 A
Radio frequency/protocol 2.4 GHz ANT+ wireless communications
protocol
WiFi IEEE 802.11b/g/n at 2.4 GHz
2.4 GHz Bluetooth 4.0
Camera water rating None**
Camera case water rating
(with watersports door)
40 m**
Camera case water rating
(with altimeter door)
IEC 60529 IPX7**
*The operating temperature range is based on the default
camera settings. Several factors may impact the operating
temperature range, including the camera case, mount
configuration, video settings, and WiFi settings.
**The camera does not withstand exposure to water or other
liquids. When properly installed, the camera case with the
watersports door withstands pressure equivalent to a depth of
40 m. When properly installed, the camera case with the
altimeter door withstands incidental exposure to water of up to 1
m for up to 30 min. For more information, go to www.garmin.com
/waterrating.
Troubleshooting
My camera does not turn on
If the camera is connected to external power and the top
status LED is either off or solid red, hold POWER to turn on
the camera.
14 Troubleshooting