STRIKER™ Series Owner’s Manual
© 2015–2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Deleting a Saved Route .............................................................. 7 Deleting All Saved Routes .......................................................... 7 Introduction.....................................................................1 Track ................................................................................ 7 Device Keys ................................................................................ 1 Contacting Garmin® Product Support .............
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Keys • Select • Select to zoom in. to zoom out. Panning on the STRIKER 4 You can move the Waypoint Map to view an area other than your present location. 1 Select or to start panning. 2 Use the arrow keys to pan. TIP: You can select to zoom. Adjusting the Backlight 1 Select Settings > System > Display > Backlight. 2 Adjust the backlight.
• To add an item to the Home screen, select Add, and select the new item. • To remove an item you have added to the Home screen, select Remove, and select the item. Adding a New Layout to the Home Screen of the STRIKER 5 or 7 You can create a custom screen to suit your needs, which is added to your home screen. 1 Select Customize Home > Add > Add New Layout. 2 Select a function layout. 3 Select a window to change. 4 Select a screen to add. 5 Repeat steps 3 and 4 for additional windows.
À Á Â Ã Ä Å Æ Ç Left side of the vessel Right side of the vessel The transducer on your vessel Trees Old tires Logs Distance from the side of the vessel Water between the vessel and the bottom Split-Screen Frequency You can view two frequencies from the split frequency screen.
À Á Â Zoomed depth scale Zoom window Depth range Pausing the Sonar Not all options are available on all models. Select an option: • From the Traditional or ClearVü sonar screen, select or . • From the SideVü sonar screen, select or . Creating a Waypoint on the Sonar Screen Using Your Present Location 1 From a sonar view, select . 2 If necessary, edit the waypoint information. Creating a Waypoint on the Sonar Screen Using a Different Location 1 2 3 4 From a sonar view, pause the sonar.
Setting the range on one screen applies that setting to all screens. Sonar Setup NOTE: Not all options and settings apply to all models and transducers. Showing and Adjusting the Depth Line You can show and adjust a horizontal line on a sonar screen. The depth of the line is indicated on the right side of the screen. NOTE: Showing a depth line on one screen displays the depth line on all the screens. > Sonar Setup > Depth 1 From a sonar screen, select Line. 2 Select .
reduce clutter. Wider beam widths (lower frequencies) can show more targets, but can generate more surface noise. TVG: Reduces surface noise. This control is best used for situations when you want to control and suppress clutter or noise near the water surface. It also allows for the display of targets near the surface that are otherwise hidden or masked by surface noise. Overlay Number Settings You can customize the data shown on the sonar screen. From a sonar screen, select > Overlay Numbers.
Editing a Saved Route You can change the name of a route or change the turns the route contains. 1 Select User Data > Routes. 2 Select a route. 3 Select Edit Route. 4 Select an option: • To change the name, select Name, and enter the name. • To select a waypoint from the turn list, select Edit Turns > Use Turn List, and select a waypoint from the list. • To select a turn using the chart, select Edit Turns > Use Waypoint Map, and select a location on the chart.
My Vessel Settings NOTE: Some settings and options require additional hardware. Select Settings > My Vessel. Transducer Type: Displays the type of transducer connected to the device (Selecting the Transducer Type, page 1). Keel Offset: Offsets the surface reading for the depth of a keel, making it possible to measure depth from the bottom of the keel instead of from the transducer location (Setting the Keel Offset, page 8). Temp.
Navigation Settings My sonar does not work NOTE: Some settings and options require additional hardware. Select Settings > Navigation. Route Labels: Sets the type of labels shown with route turns on the map. Turn Transition Activ.: Sets the turn transition to be calculated based on time or distance. Turn Transition Time: Sets how many minutes before the turn that you transition to it as the next leg, when Time is selected for the Turn Transition Activ. setting. Turn Transition Dist.
Index A alarms 8 anchor drag 8 arrival 8 navigation 8 off course 8 sonar 8 anchor drag alarm 8 arrival alarm 8 B backlight 1 beeper 1 C clock 8 alarm 8 color mode 1 D data fields 6 deleting, all user data 7 device keys 1 registration 9 display settings 7 E event log 7 F factory settings 7, 9 G S safe depth 9 safe height 9 satellite signals, acquiring 1 screen, brightness 1 settings 1, 2, 6–9 system information 7 SideVü 3 sonar 2, 3 a-scope 5 alarms 8 appearance 2, 5 bottom lock 4 color scheme 5 depth
support.garmin.