Instructions / Assembly

You can also follow a saved course, trying to match or exceed
previously set performance goals. For example, if the original
course was completed in 30 minutes, you can race against a
Virtual Partner trying to complete the course in under 30
minutes.
Creating and Following a Course on Your Device
1
From the watch face, select START.
2
Select an activity.
3
Hold UP, and select Navigation > Courses > Create New.
4
Enter a name for the course, and select .
5
Select Add Location.
6
Select an option.
7
If necessary, repeat steps 3 and 4.
8
Select Done > Do Course.
Navigation information appears.
9
Select START to begin navigation.
Saving Your Location
You can save your current location to navigate back to it later.
1
Hold LIGHT.
2
Select .
NOTE: You may need to add this item to the controls menu
(Customizing the Controls Menu, page 21).
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select START.
2
Select an activity.
NOTE: This feature is not available for all activities.
3
Hold UP, and select Navigation > Saved Locations.
4
Select a saved location.
5
Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
1
From the watch face, select START.
2
Select an activity.
NOTE: This feature is not available for all activities.
3
Hold UP, and select Navigation > Saved Locations >
Delete All.
Navigating to Your Starting Point During an
Activity
You can navigate back to the starting point of your current
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1
During an activity, select STOP > Back to Start.
2
Select an option:
• To navigate back to the starting point of your activity along
the path you traveled, select TracBack.
• To navigate back to the starting point of your activity in a
straight line, select Straight Line.
Your current location
À
, the track to follow
Á
, and your
destination
Â
appear on the map.
Navigating to a Saved Location
Before you can navigate to a saved location, your device must
locate satellites.
1
From the watch face, select START.
2
Select an activity.
NOTE: This feature is not available for all activities.
3
Hold UP, and select Navigation > Saved Locations.
4
Select a location, and select Go To.
5
Move forward.
The compass arrow points toward the saved location.
TIP: For more accurate navigation, orient the top of the
screen toward the direction in which you are moving.
6
Press START to start the activity timer.
Stopping Navigation
1
During an activity, hold UP.
2
Select Stop Navigation.
Map
represents your location on the map. Location names and
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
• Map navigation (Panning and Zooming the Map, page 19)
• Map settings (Map Settings, page 19)
Panning and Zooming the Map
1
While navigating, select UP or DOWN to view the map.
2
Hold UP.
3
Select Pan/Zoom.
4
Select an option:
• To toggle between panning up and down, panning left and
right, or zooming, select START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
Map Settings
You can customize how the map appears in the map app and
data screens.
Hold UP, and select Settings > Map.
Orientation: Sets the orientation of the map. The North Up
option shows north at the top of the screen. The Track Up
option shows your current direction of travel at the top of the
screen.
User Locations: Shows or hides saved locations on the map.
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Navigation 19