STRIKER™ PLUS 4/5/7/9 Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.....................................................................1 Device Keys ................................................................................ 1 Home Screen .............................................................................. 1 Zooming on the STRIKER Plus 4 ............................................... 1 Panning on the STRIKER Plus 4 ................................................ 1 GPS Satellite Signal Acquisition .............................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Keys GPS Satellite Signal Acquisition When you turn on the fishfinder, the GPS receiver must collect satellite data and establish the current location. When the fishfinder acquires satellite signals, appears at the top of the Home screen. When the fishfinder loses satellite signals, disappears and a flashing question mark appears over on the screen.
1 2 3 4 5 6 7 8 9 Select Customize > Add > Add Combo. Select the first function. Select the second function. Select Split to choose the direction of the split screen (optional). Select Next. Enter a name for the page. TIP: Select to select the letter. Use the arrow keys to resize the windows. Use the arrow keys to select a location on the home screen. Select to exit. Customizing a Combination Page 1 Open a combination page. > Configure.
Updating Software with the ActiveCaptain App If your device has Wi‑Fi technology, you can use the ActiveCaptain app to download and install the latest software updates for your device. NOTICE Software updates may require the app to download large files. Regular data limits or charges from your Internet service provider apply. Contact your Internet service provider for more information about data limits or charges. The installation process can take several minutes.
À Á Â Ã Ä Å Æ Ç Left side of the vessel Right side of the vessel The transducer on your vessel Trees Old tires Logs Distance from the side of the vessel Water between the vessel and the bottom Split-Screen Frequency You can view two frequencies from the split frequency screen. Flasher The flasher shows sonar information on a circular depth scale, indicating what is beneath your boat. It is organized as a ring that starts at the top and progresses clockwise.
Viewing two frequencies concurrently using the split-frequency view allows you to see deeper with the lower frequency return and, at the same time, see more detail from the higher frequency return. Selecting Frequencies NOTE: You cannot adjust the frequency for all sonar views and transducers. You can indicate which frequencies appear on the sonar screen. > Frequency. 1 From a sonar view, select 2 Select a frequency suited to your needs and water depth.
2 Select an option: 1 From a sonar screen, select • To adjust the scroll speed automatically using speed-overground, select Auto. The Auto setting selects a scroll rate to match the boat speed, so targets in the water are drawn with the correct aspect ratio and appear less distorted. When viewing Garmin ClearVü or SideVü sonar views, it is recommend to use the Auto setting. • To use a very fast scroll speed, select Ultrascroll .
Garmin Quickdraw Contours Mapping WARNING The Garmin Quickdraw Contours mapping feature allows users to generate maps. Garmin makes no representations about the accuracy, reliability, completeness or timeliness of the maps generated by third parties. Any use or reliance on the maps generated by third parties is at your own risk. The Garmin Quickdraw Contours mapping feature allows you to instantly create maps with contours and depth labels for any body of water.
Overlay Numbers: Allows you to customize the data shown on the map. Garmin Quickdraw Contours Settings Select Quickdraw Map > > Quickdraw Contours > Settings. Display: Displays Garmin Quickdraw Contours. The My Contours option shows your own Garmin Quickdraw Contours maps. The Community Contours option shows the maps you have downloaded from the Garmin Quickdraw Community. Recording Offset: Sets the distance between the sonar depth and the contour recording depth.
2 Select an option: • To create the waypoint by entering position coordinates, select Enter Coordinates, and enter the coordinates. • To create the waypoint using a chart, select Use Chart, select the location, and select . Marking and Navigating to a Man Overboard Location From any screen, select > Man Overboard > Yes. The fishfinder sets a direct course back to the location. Measuring Distance on the Map You can measure the distance between your location and another location. 1 Pan the map.
A magenta line appears. In the center of the magenta line is a thinner purple line that represents the corrected course from your present location to the destination. The corrected course is dynamic, and it moves with your boat when you are off course. 6 Review the course indicated by the magenta line. 7 Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other obstacles.
Beeper: Turns on and off the tone that sounds for alarms and selections (Setting the Beeper, page 2). GPS: Provides information about the GPS satellite settings and fix. Auto Power: Turns on the device automatically when power is applied. Keyboard Layout: Sets the arrangement of the keyboard to an alphabetical or computer keyboard layout. Language: Sets the on-screen language. System Information: Provides information about the device and the software version.
Shallow Water: Sounds when the water depth is shallower than the specified depth. Deep Water: Sounds when the water depth is deeper than the specified depth. Water Temp.: Sounds when the water temperature varies more than ± 2°F (± 1.1°C). Alarm settings are saved when the device is turned off. NOTE: You must connect the device to a temperaturecapable transducer to use this alarm. Fish: Sets an alarm to sound when the device detects a suspended target.
Appendix Registering Your Device with the Serial Number If your device does not have Wi‑Fi technology, you can register using the device's serial number. If your device has Wi‑Fi technology, you should use the ActiveCaptain app to register the device (Getting Started with the ActiveCaptain App, page 2). Keep the original sales receipt, or a photocopy, in a safe place. 1 Locate the serial number on the product box or on the device. 2 Go to my.garmin.com/registration. 3 Sign in to your Garmin account.
Index A ActiveCaptain 2 quickdraw 7 smart notifications 2 updating software 3 alarms 11 anchor drag 11 arrival 11 navigation 11 off course 11 sonar 11 anchor drag alarm 11 arrival alarm 11 B backlight 2 beeper 2 C charts 7 quickdraw 7 clock 11 alarm 11 color mode 2 combinations 1 customizing 2 courses 8 notifications 2 O off course alarm 11 overlay numbers 6, 7 P panning 1 product registration 13 Q quickdraw 7, 8 deleting 7 settings 7, 8 quickdrawsettings 8 R registering the device 13 Route To 8 rout
support.garmin.
Quick Start Manual
Introduction ® cv See the Important Safety and Product Information guide in the product box for product warnings and other important information. ------------------- £ -+ Saves the present location as a waypoint. Zooms out of a view. (Not available on all models.) Zooms in to a view. (Not available on all models.) Device Keys NOTICE Before turning on the device, you must firmly press the connectors into the appropriate holes in the device.
brightness levels. This can be helpful when the brightness is so low you cannot see the screen. For more information about which transducer is best for your needs, go to www.garmin.com/transducers. Different sonar views can help you view Adjusting the Color Mode 1 Select Settings> System > Display the fish in the area. The sonar views available vary depending on the type of > Color Mode. TIP: Select <.!> > Color Mode from any transducer and sounder module connected to the chartplotter.
CD Depth information @ Suspended targets or fish ® Bottom of the body of water Selecting the Transducer Type If you are connecting a transducer that was not included with the device, you may need to set the transducer type to make the sonar function properly. Before connecting the transducer, you should select the transducer type. The transducer name should be listed on the label on the transducer cable, near the connector.
The fishfinder sets a direct course back to the location. Mapping a Body of Water Using the Garmin Quickdraw™ Contours Feature • Check to make sure the device is receiving at least 10 Vdc, but 12 Vdc is recommended. To check the voltage, measure the female power and ground sockets of the power cable for DC voltage. If the voltage is less than 10 Vdc, the device will not turn on. Before you can use the Garmin Quickdraw Contours feature, you must have sonar depth and your GPS position.
© 2017 Garmin Ltd. or its subsidiaries Garmin®, the Garmin logo, and UltrascroW' are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin ClearVuTM, Garmin QuickdrawTM, and STRIKERTM are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. lHl CE Printed in Taiwan September 2017 190-02226-0I_OA ~· ..
& GAR MIN® Garmin ClearVu Transducer Transom/ Trolling Motor Mount Installation Instructions .......................................... 2 Instructions d'installation ........................................ 4 lstruzioni di installazione ........ ................................ 7 lnstallationsanweisungen ..................................... 10 lnstrucciones de instalaci6n ................................. 13 lnstruc;;oes de instalac;;ao ...................................... 17 lnstallationsvejledning .
GARMIN CLEARVO TRANSDUCER TRANSOM/ TROLLING MOTOR MOUNT Installation Instructions Important Safety Information See the Important Safety and Product Information guide in the chartplotter or fishfinder product box for product warnings and other important information. You are responsible for the safe and prudent operation of your vessel. Sonar is a tool that enhances your awareness of the water beneath your boat. It does not relieve you of the responsibility of observing the water around your boat as you .&.
3 Mark the center location of the two holes of the 2 Remove the cable-entry cover, and, using a template. 4 Remove the template from the transom. 3.2 mm (1/8 in.) bit, drill the pilot holes approximately 10 mm (3Ja in.) deep. 3 Fill the pass-through hole with marine sealant so it covers the cable completely and there is excess sealant around the hole and the cable. 4 Place the cable-entry cover over the hole and the cable, with the opening pointing downward.
2 Route the cable through the cable exit @ so the cable is on the top side of the trolling motor housing when stowed . Installing the Transducer on a Trolling Motor NOTICE Do not cut the transducer cable. Cutting the transducer cable will void your warranty. 1 Insert the hose clamp G) through the slot on the transducer mount @, until equal lengths extend on both sides of the mount.
© 2017 Garmin Ltd. or its subsidiaries support.garmin.
• GAR MIN® Transducer Transom Mount Template 8 January 2017 190-02160-05_0C ~ Printed in Taiwan
• STRIKER Plus 5:30 em (11.8 in.) • STRIKER Plus 7:40 em (15.75 in.) • STRIKER Plus 9:45 em (17.7 in.) • Compass Safe Distance • Distance de securite du com pas • Distanza di sicurezza dalla bussola • • Sicherheitsabstand zum Kompass • Consumo electrico maximo • Distancia segura da bussola • • Sikkerhedsafstand for kompas • Trygg avstand fra et kompass • Sakerhetsavstc'md till kompass • Wi-Fi®2.4 GHz @ 22 dBm nominal A GAR MIN® STRIKER™ Plus 5/7/9 Fixed Bail Mount 0 3 mm (1/8 in.
Push cables FIRMLY. Not all models have three connectors. Poussez les cables FERMEMENT. Tous les modeles ne disposent pas de trois connecteurs. lnserire SALDAMENTE i cavi. Non tutti i modelli hanno Ire connettori. Drucken Sie die Kabel FEST ein. Nicht aile Modelle verfugen i.iber drei Anschlusse. lnserta los cables CON FIRMEZA. No todos los modelos incluyen tres conectores. Empurre os cabos COM FIRMEZA. Nem todos os modelos tem Ires conectores. 12 Vdc Skub kablerne FAST. lkke aile modeller har Ire stik.
Garmin is here to help! Before contacting your retailer, please visit Garmin Product Support at www.garmin.com/support if you have questions about your device. Garmin ist fur Sie da! Bevor Sie sich an lhren Handler wenden, besuchen Sie bei Fragen zu lhrem Gerat bitte die Website des Garmin-Supports unter www.garmin.com/support. Garmin est Ia pour vous aider ! Avant de prendre contact avec votre revendeur, veuillez consulter le service d'assistance produit de Garmin a l'adresse www.garmin.
GAR MIN® IMPORTANT SAFETY AND PRODUCT INFORMATION Failure to heed the following warning~ c~uldr~~~lti~ ~n ~~cident ~rc.~llisio~ r~sulti~9 in de~th or ~~rio~s i~jury~ ·· · ·· ··· · · · · ··· · ~- ····· ····· ··· ·--···· ···· ··-· · ······ ·- · ............ ··· · ····· ·· ··· · · · Marine-operation~warnir19s·--· - --· • You are responsible for the safe and prudent operation of your vessel. This device is a tool that will enhance your capability to operate your vessel.
warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. Garmin navigation products are intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. Garmin makes no warranty as to the accuracy or completeness of map data.