STRIKER™ PLUS 4/5/7/9 Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.....................................................................1 Device Keys ................................................................................ 1 Home Screen .............................................................................. 1 Zooming on the STRIKER Plus 4 ............................................... 1 Panning on the STRIKER Plus 4 ................................................ 1 GPS Satellite Signal Acquisition .............................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Keys GPS Satellite Signal Acquisition When you turn on the fishfinder, the GPS receiver must collect satellite data and establish the current location. When the fishfinder acquires satellite signals, appears at the top of the Home screen. When the fishfinder loses satellite signals, disappears and a flashing question mark appears over on the screen.
1 2 3 4 5 6 7 8 9 Select Customize > Add > Add Combo. Select the first function. Select the second function. Select Split to choose the direction of the split screen (optional). Select Next. Enter a name for the page. TIP: Select to select the letter. Use the arrow keys to resize the windows. Use the arrow keys to select a location on the home screen. Select to exit. Customizing a Combination Page 1 Open a combination page. > Configure.
Updating Software with the ActiveCaptain App If your device has Wi‑Fi technology, you can use the ActiveCaptain app to download and install the latest software updates for your device. NOTICE Software updates may require the app to download large files. Regular data limits or charges from your Internet service provider apply. Contact your Internet service provider for more information about data limits or charges. The installation process can take several minutes.
À Á Â Ã Ä Å Æ Ç Left side of the vessel Right side of the vessel The transducer on your vessel Trees Old tires Logs Distance from the side of the vessel Water between the vessel and the bottom Split-Screen Frequency You can view two frequencies from the split frequency screen. Flasher The flasher shows sonar information on a circular depth scale, indicating what is beneath your boat. It is organized as a ring that starts at the top and progresses clockwise.
Viewing two frequencies concurrently using the split-frequency view allows you to see deeper with the lower frequency return and, at the same time, see more detail from the higher frequency return. Selecting Frequencies NOTE: You cannot adjust the frequency for all sonar views and transducers. You can indicate which frequencies appear on the sonar screen. > Frequency. 1 From a sonar view, select 2 Select a frequency suited to your needs and water depth.
2 Select an option: 1 From a sonar screen, select • To adjust the scroll speed automatically using speed-overground, select Auto. The Auto setting selects a scroll rate to match the boat speed, so targets in the water are drawn with the correct aspect ratio and appear less distorted. When viewing Garmin ClearVü or SideVü sonar views, it is recommend to use the Auto setting. • To use a very fast scroll speed, select Ultrascroll .
Garmin Quickdraw Contours Mapping WARNING The Garmin Quickdraw Contours mapping feature allows users to generate maps. Garmin makes no representations about the accuracy, reliability, completeness or timeliness of the maps generated by third parties. Any use or reliance on the maps generated by third parties is at your own risk. The Garmin Quickdraw Contours mapping feature allows you to instantly create maps with contours and depth labels for any body of water.
Overlay Numbers: Allows you to customize the data shown on the map. Garmin Quickdraw Contours Settings Select Quickdraw Map > > Quickdraw Contours > Settings. Display: Displays Garmin Quickdraw Contours. The My Contours option shows your own Garmin Quickdraw Contours maps. The Community Contours option shows the maps you have downloaded from the Garmin Quickdraw Community. Recording Offset: Sets the distance between the sonar depth and the contour recording depth.
2 Select an option: • To create the waypoint by entering position coordinates, select Enter Coordinates, and enter the coordinates. • To create the waypoint using a chart, select Use Chart, select the location, and select . Marking and Navigating to a Man Overboard Location From any screen, select > Man Overboard > Yes. The fishfinder sets a direct course back to the location. Measuring Distance on the Map You can measure the distance between your location and another location. 1 Pan the map.
A magenta line appears. In the center of the magenta line is a thinner purple line that represents the corrected course from your present location to the destination. The corrected course is dynamic, and it moves with your boat when you are off course. 6 Review the course indicated by the magenta line. 7 Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other obstacles.
Beeper: Turns on and off the tone that sounds for alarms and selections (Setting the Beeper, page 2). GPS: Provides information about the GPS satellite settings and fix. Auto Power: Turns on the device automatically when power is applied. Keyboard Layout: Sets the arrangement of the keyboard to an alphabetical or computer keyboard layout. Language: Sets the on-screen language. System Information: Provides information about the device and the software version.
Shallow Water: Sounds when the water depth is shallower than the specified depth. Deep Water: Sounds when the water depth is deeper than the specified depth. Water Temp.: Sounds when the water temperature varies more than ± 2°F (± 1.1°C). Alarm settings are saved when the device is turned off. NOTE: You must connect the device to a temperaturecapable transducer to use this alarm. Fish: Sets an alarm to sound when the device detects a suspended target.
Appendix Registering Your Device with the Serial Number If your device does not have Wi‑Fi technology, you can register using the device's serial number. If your device has Wi‑Fi technology, you should use the ActiveCaptain app to register the device (Getting Started with the ActiveCaptain App, page 2). Keep the original sales receipt, or a photocopy, in a safe place. 1 Locate the serial number on the product box or on the device. 2 Go to my.garmin.com/registration. 3 Sign in to your Garmin account.
Index A ActiveCaptain 2 quickdraw 7 smart notifications 2 updating software 3 alarms 11 anchor drag 11 arrival 11 navigation 11 off course 11 sonar 11 anchor drag alarm 11 arrival alarm 11 B backlight 2 beeper 2 C charts 7 quickdraw 7 clock 11 alarm 11 color mode 2 combinations 1 customizing 2 courses 8 notifications 2 O off course alarm 11 overlay numbers 6, 7 P panning 1 product registration 13 Q quickdraw 7, 8 deleting 7 settings 7, 8 quickdrawsettings 8 R registering the device 13 Route To 8 rout
support.garmin.
GAR MIN® Quick Start Manual
Introduction See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Keys @ -6 - Turns on and off the device when held. Performs one or more of these actions when quickly pressed: • Adjusts the backlight • Adjusts the color mode Enables and disables sonar r I ® 1:([) • 9. ~• Saves the present location as a waypoint. Scrolls, highlights options, and moves the cursor.
6 From your mobile device settings, open the Wi-Fi connections page and connect to the Garmin®device, using the name and password you entered in the Garmin device. For more information about the ActiveCaptain app and features, see the Owner's Manual at www.garmin.com/manuals/STRIKERPius7-9 or watch a video at www .garmin .com/ActiveCaptain Video. Acquiring GPS Satellite Signals The device may need a clear view of the sky to acquire satellite signals.
The full-screen Traditional sonar view shows a large image of the sonar readings from a transducer. The range scale along the right side of the screen shows the depth of detected objects as the screen scrolls from the right to the left. Sonar Frequencies NOTE: The frequencies that are available depend on the transducer being used. Adjusting the frequency helps adapt the sonar for your particular goals and the present depth of the water.
3 4 5 6 Select..; to add a turn to the route. Repeat to add all of the turns in the route. Select=> Navigate To. Select an option. Marking and Navigating to a Man Overboard Location From any screen, select£> Man Overboard> Yes. The fishfinder sets a direct course back to the location. Mapping a Body of Water Using the Garmin Quickdraw™ Contours Feature Before you can use the Garmin Quickdraw Contours feature, you must have sonar depth and your GPS position.
su ort. armin.com © 2017 Garmin Ltd. or its subsidiaries Garmin®,the Garmin logo, and Ultrascroll®are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ActiveCaptain™, Garmin ClearVu™, Garmin QuickdrawTM, and STRIKERTMare trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. Wi-Fi'vis a registered mark of Wi-Fi Alliance Corporation.
& GAR MIN® Garmin ClearVu Transducer Transom/ Trolling Motor Mount Installation Instructions .......................................... 2 Instructions d'installation ........................................ 4 lstruzioni di installazione .. ...................................... 7 lnstallationsanweisungen ..................................... 10 lnstrucciones de instalaci6n ................................. 13 lnstru~oes de instala~~IO ........ ..............................
GARMIN CLEARVO TRANSDUCER TRANSOM/ TROLLING MOTOR MOUNT Installation Instructions Important Safety Information See the Important Safety and Product Information guide in the chartplotter or fishfinder product box for product warnings and other important information. You are responsible for the safe and prudent operation of your vessel. Sonar is a tool that enhances your awareness of the water beneath your boat.
3 Mark the center location of the two holes of the 2 Remove the cable-entry cover, and, using a template. 4 Remove the template from the transom. 5 Wrap a piece of tape around a 4 mm (5/32 in.) bit 3 6 If you are installing the bracket on fiberglass, 4 at 18 mm f/ 10 in.) from the point of the bit, to avoid drilling the pilot holes too deep. place a piece of tape over the pilot-hole location to reduce cracking of the gel coat.
2 Route the cable through the cable exit @ so the Installing the Transducer on a Trolling Motor NOTE: In order for the software update instructions to appear, the device must be fully booted before the card is inserted. 3 Follow the on-screen instructions. NOTICE 4 Wait several minutes while the software update cable is on the top side of the trolling motor housing when stowed. Do not cut the transducer cable. Cutting the transducer cable will void your warranty.
• GAR MIN® Transducer Transom Mount Template 8 January 2017 190-02160-05_0C ~ Printed in Taiwan
• STRIKER Plus 5:30 em (11.8 in.) • STRIKER Plus 7:40 em (15.75 in.) • STRIKER Plus 9:45 em (17.7 in.) • Compass Safe Distance • Distance de securite du compas • Distanza di sicurezza dalla bussola • • Sicherheitsabstand zum Kompass • Consumo electrico maximo • Distancia segura da bussola • • Sikkerhedsafstand for kompas • Trygg avstand fra et kompass • Sakerhetsavstand till kompass • Wi-Fi®2.4 GHz@ 22 dBm nominal & GAR MIN® STRIKER™ Plus 5/7/9 Fixed Bail Mount 0 3 mm (1/8 in.
Push cables FIRMLY. Not all models have three connectors. Poussez les cables FERMEMENT. Taus les modeles ne disposent pas de trois connecteurs. lnserire SALDAMENTE i cavi. Non tutti i modelli hanna tre connettori. Dri.icken Sie die Kabel FEST ein. Nicht aile Madelle verfi.igen i.iber drei Anschli.isse. lnserta los cables CON FIRMEZA. No todos los modelos incluyen Ires conectores. Empurre os cabos COM FIRMEZA. Nem todos os modelos tem tres conectores. 12 Vdc Skub kablerne FAST.
GAR MIN® IMPORTANT SAFETY AND PRODUCT INFORMATION Failure to heed the following warnings could result in an a~~i~~!.lt._9.!_ ~!!~9.~.!~~~!~J!l_
warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. Garmin navigation products are intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. Garmin makes no warranty as to the accuracy or completeness of map data.
Garmin is here to help! Before contacting your retailer, please visit Garmin Product Support at www.garmin.com/support if you have questions about your device. Garmin ist fur Sie da! Bevor Sie sich an lhren Handler wenden, besuchen Sie bei Fragen zu lhrem Gerat bitte die Website des Garmin-Supports unter www.garmin.com/support. Garmin est Ia pour vous aider ! Avant de prendre contact avec votre revendeur, veuillez consulter le service d'assistance produit de Garmin a l'adresse www.garmin.
