User Manual

Wireless Sensors 27
saved activity in a straight line or along the path you
traveled. This feature is available only for activities
that use GPS.
1 Select START.
2 Hold UP.
3 Select Navigation > Activities.
4 Select your last saved activity.
5 Select Back to Start.
6 Select an option:
• To navigate back to the starting point of your
activity along the path you traveled, select
TracBack
®
.
• To navigate back to the starting point of your
activity in a straight line, select Straight Line.
Navigating to a Saved Location
Before you can navigate to a saved location, your
device must locate satellites.
1 From the watch face, select START.
2 Select an activity.
NOTE: This feature is not available for all activities.
3 Hold UP.
4 Select Navigation > Saved Locations.
5 Select a location, and select Go To.
6 Move forward.
The compass arrow points toward the saved
location.
TIP: For more accurate navigation, orient the top
of the screen toward the direction in which you are
moving.
7 Press START to start the activity timer.
Map
represents your location on the map. Location
names and symbols appear on the map. When you are
navigating to a destination, your route is marked with a
line on the map.
y Map navigation (Panning and Zooming the Map,
page27)
y Map settings (Map Settings, page27)
Adding a Map to an Activity
You can add the map to the data screens loop for an
activity.
1 From the watch face, hold UP.
2 Select Settings > Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens > Add New > Map.
Panning and Zooming the Map
1 While navigating, select UP or DOWN to view the
map.
2 Hold UP.
3 Select Pan/Zoom.
4 Select an option:
• To toggle between panning up and down,
panning left and right, or zooming, select
START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
Map Settings
You can customize how the map appears in the map
app and data screens.
From the watch face, hold UP, and select Settings >
Map.
Orientation: Sets the orientation of the map. The North
Up option shows north at the top of the screen.
The Track Up option shows your current direction
of travel at the top of the screen.
User Locations: Shows or hides saved locations on the
map.
Auto Zoom: Automatically selects the zoom level for
optimal use of your map. When disabled, you must
zoom in or out manually.
Wireless Sensors
Your device can be used with wireless ANT+ or
Bluetooth sensors. For more information about
compatibility and purchasing optional sensors, go to
buy.garmin.com.
Pairing Your Wireless Sensors
The first time you connect a wireless sensor to your
device using ANT+ or Bluetooth technology, you must
pair the device and sensor. After they are paired, the
device connects to the sensor automatically when you
start an activity and the sensor is active and within
range.
1 If you are pairing a heart rate monitor, put on the
heart rate monitor.
The heart rate monitor does not send or receive
data until you put it on.
2 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless
sensors while pairing.
3 Hold UP.
4 Select Settings > Sensors & Accessories > Add
New.
5 Select an option:
• Select Search All.
• Select your sensor type.
After the sensor is paired with your device,
the sensor status changes from Searching to
Connected. Sensor data appears in the data screen
loop or a custom data field.