User Manual

30 Customizing Your Device
• Select a field to change the data that appears in
the field.
• Select Reorder to change the location of the
data screen in the loop.
• Select Remove to remove the data screen from
the loop.
8 If necessary, select Add New to add a data screen
to the loop.
You can add a custom data screen, or select one of
the predefined data screens.
Alerts
You can set alerts for each activity, which can help
you to train toward specific goals, to increase your
awareness of your environment, and to navigate to
your destination. Some alerts are available only for
specific activities. There are three types of alerts:
event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event
is a specific value. For example, you can set the
device to alert you when you reach a specified
distance.
Range alert: A range alert notifies you each time the
device is above or below a specified range of
values. For example, you can set the device to alert
you when your heart rate is below 60 beats per
minute (bpm) and over 210 bpm.
Recurring alert: A recurring alert notifies you each time
the device records a specified value or interval. For
example, you can set the device to alert you every
30 minutes.
Alert Name Alert Type Description
Cadence Range
You can set minimum and
maximum cadence values.
Calories
Event,
recurring
You can set the number of
calories.
Custom Recurring
You can select an existing
message or create a custom
message and select an alert
type.
Distance Recurring
You can set a distance
interval.
Heart Rate Range
You can set minimum and
maximum heart rate values
or select zone changes.
See About Heart Rate Zones,
page41 and Heart Rate
Zone Calculations, page9.
Pace Range
You can set minimum and
maximum pace values.
Run/Walk Recurring
You can set timed walking
breaks at regular intervals.
Stroke
Rate
Range
You can set high or low
strokes per minute.
Time
Event,
recurring
You can set a time interval.
Setting an Alert
1 Hold UP.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Alerts.
6 Select an option:
• Select Add New to add a new alert for the
activity.
• Select the alert name to edit an existing alert.
7 If necessary, select the type of alert.
8 Select a zone, enter the minimum and maximum
values, or enter a custom value for the alert.
9 If necessary, turn on the alert.
For event and recurring alerts, a message appears
each time you reach the alert value. For range alerts, a
message appears each time you exceed or drop below
the specified range (minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific
distance automatically. This feature is helpful for
comparing your performance over different parts of an
activity (for example, every 1 mile or 5 kilometers).
1 Hold UP.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Lap.
6 Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance
between laps.
Each time you complete a lap, a message appears that
displays the time for that lap. The device also beeps
or vibrates if audible tones are turned on (System
Settings, page32).
If necessary, you can customize the data pages to
display additional lap data (Customizing the Data
Screens, page29).
Customizing the Lap Alert Message
You can customize one or two data fields that appear
in the lap alert message.
1 Hold UP.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Lap > Lap Alert.