User Manual

34 Device Information
information. You must also set the VIRB widget to be
shown in the widget loop (Customizing the Widget Loop,
page29).
1 Turn on your VIRB camera.
2 On your Forerunner device, select UP or DOWN
from the watch face to view the VIRB widget.
3 Wait while the device connects to your VIRB
camera.
When the camera is connected, a VIRB data screen
is automatically added to the activity apps.
4 During an activity, select UP or DOWN to view the
VIRB data screen.
5 Hold UP.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity timer,
select Settings > Timer Start/Stop.
NOTE: Video recording automatically starts and
stops when you start and stop an activity.
• To control the camera using the menu options,
select Settings > Manual.
• To manually record video, select Start
Recording.
The video counter appears on the Forerunner
screen.
• To take a photo while recording video, select
DOWN.
• To manually stop recording video, select STOP.
• To take a photo, select Take Photo.
Device Information
Viewing Device Information
You can view device information, such as the unit ID,
software version, regulatory information, and license
agreement.
1 From the watch face, hold UP.
2 Select Settings > System > About.
Viewing E-label Regulatory and Compliance
Information
The label for this device is provided electronically. The
e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional
compliance markings, as well as applicable product
and licensing information.
1 From the watch face. hold UP.
2 Select Settings > System > About.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the
Important Safety and Product Information guide in the
product box for product warnings and other important
information.
NOTICE
To prevent corrosion, thoroughly clean and dry the
contacts and the surrounding area before charging
or connecting to a computer. Refer to the cleaning
instructions in the appendix.
1 Plug the small end of the USB cable into the
charging port on your device.
2 Plug the large end of the USB cable into a USB
charging port.
3 Charge the device completely.
Tips for Charging the Device
1 Connect the charger securely to the device to
charge it using the USB cable (Charging the Device,
page34).
You can charge the device by plugging the USB
cable into a Garmin approved AC adapter with
a standard wall outlet or a USB port on your
computer. Charging a fully depleted battery takes
up to two hours.
2 Remove the charger from the device after the
battery charge level reaches 100%.
Wearing the Device
y Wear the device above your wrist bone.
NOTE: The device should be snug but comfortable.
For more accurate heart rate readings, the device
should not move while running or exercising.
For pulse oximeter readings, you should remain
motionless.
NOTE: The optical sensor is located on the back of
the device.
y See Tips for Erratic Heart Rate Data, page14 for
more information about wrist-based heart rate.