Owner's Manual

6
Press MENU.
7
Select Delete.
Using the Stopwatch
1
From the watch face, hold MENU.
2
Select Clocks.
3
Press UP or DOWN to scroll to the stopwatch screen.
4
Press .
5
Press to start the timer.
6
Press LAP to restart the lap timer .
The total stopwatch time continues running.
7
Press to stop both timers.
8
Select an option:
• To reset both timers, press DOWN.
• To review the lap timers, press MENU, and select Review.
• To save the stopwatch time as an activity, press MENU,
and select Save Activity.
• To exit the stopwatch, press MENU, and select Done.
Adding Alternate Time Zones
You can display the current time of day in additional time zones
on the Alt. Time Zones widget. You can add up to four alternate
time zones.
NOTE: You may need to add the Alt. Time Zones widget to the
widget loop.
1
From the watch face, hold MENU.
2
Select Clocks.
3
Press UP or DOWN to scroll to the time zones screen.
4
Select an option:
• To set a time zone for the first time, select Set Time
Zones > Add Zone.
• To set additional time zones, press , and select Add
Zone.
5
Select a time zone.
6
If necessary, rename the zone.
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
NOTE: You can add options to the controls menu (Customizing
the Controls Menu, page 30).
1
Hold LIGHT.
2
Select .
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, press .
2
Select Navigate > Saved Locations.
3
Select a saved location.
4
Select an option to edit the location.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
NOTE: You may need to add the Project Wpt. app to the
activities and apps list.
1
From the watch face, press .
2
Select Project Wpt..
3
Press UP or DOWN to set the heading.
4
Press .
5
Press DOWN to select a unit of measure.
6
Press UP to enter the distance.
7
Press to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, press .
2
Select an activity.
3
Hold MENU.
4
Select Navigation.
5
Select a category.
6
Respond to the on-screen prompts to choose a destination.
7
Select Go To.
Navigation information appears.
8
Press to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, press .
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Courses > Create New.
5
Enter a name for the course, and select .
6
Select Add Location.
7
Select an option.
8
If necessary, repeat steps 6 and 7.
9
Select Done > Do Course.
Navigation information appears.
10
Press to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function (Customizing the Hot Keys, page 33).
1
From the watch face, press .
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Last MOB.
Navigation information appears.
24 Navigation