Use and Care Manual

Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also add the
VIRB widget to the widget loop (Customizing the Widget Loop,
page 32).
1
Turn on your VIRB camera.
2
On your fēnix watch, press UP or DOWN from the watch face
to view the VIRB widget.
3
If necessary, press to pair your fēnix watch with your VIRB
camera.
4
Wait while your watch connects to your camera.
5
Select an option:
• To record video, select Start Recording.
The video counter appears on the fēnix screen.
• To take a photo while recording video, press DOWN.
• To stop recording video, press .
• To take a photo, select Take Photo.
• To take multiple photos in burst mode, select Take Burst.
• To send the camera to sleep mode, select Sleep Camera.
• To wake the camera from sleep mode, select Wake
Camera.
• To change video and photo settings, select Settings.
Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also add the
VIRB widget to the widget loop (Customizing the Widget Loop,
page 32).
1
Turn on your VIRB camera.
2
On your fēnix watch, press UP or DOWN from the watch face
to view the VIRB widget.
3
If necessary, press to pair your fēnix watch with your VIRB
camera.
4
Wait while your watch connects to your camera.
When the camera is connected, a VIRB data screen is
automatically added to activities.
5
During an activity, press UP or DOWN to view the VIRB data
screen.
6
Hold MENU.
7
Select VIRB.
8
Select an option:
• To control the camera using the activity timer, select
Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and stops
when you start and stop an activity.
• To control the camera using the menu options, select
Settings > Recording Mode > Manual.
• To manually record video, select Start Recording.
The video counter appears on the fēnix screen.
• To take a photo while recording video, press DOWN.
• To manually stop recording video, press .
• To take multiple photos in burst mode, select Take Burst.
• To send the camera to sleep mode, select Sleep Camera.
• To wake the camera from sleep mode, select Wake
Camera.
Using the Stress Level Widget
The stress level widget displays your current stress level and a
graph of your stress level for the last several hours. It can also
guide you through a breathing activity to help you relax.
1
While you are sitting or inactive, press UP or DOWN from the
watch face to view the stress level widget.
TIP: If you are too active for the watch to determine your
stress level, a message appears instead of a stress level
number. You can check your stress level again after several
minutes of inactivity.
2
Press to view a graph of your stress level for the last four
hours.
Blue bars indicate periods of rest. Yellow bars indicate
periods of stress. Gray bars indicate times that you were too
active to determine your stress level.
3
To start a breathing activity, press DOWN > , and enter a
duration for the breathing activity in minutes.
Customizing the My Day Widget
You can customize the list of metrics displayed on the My Day
widget.
1
From the watch face, press UP or DOWN to view the My Day
widget.
2
Hold MENU.
3
Select Options.
4
Select the toggle switches to show or hide each metric.
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut
menu options in the controls menu (Viewing the Controls Menu,
page 1).
1
Hold MENU.
2
Select Controls.
3
Select a shortcut to customize.
4
Select an option:
• Select Reorder to change the location of the shortcut in
the controls menu.
• Select Remove to remove the shortcut from the controls
menu.
5
If necessary, select Add New to add an additional shortcut to
the controls menu.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must
install a watch face from the Connect IQ store (Connect IQ
Features, page 11).
You can customize the watch face information and appearance,
or activate an installed Connect IQ watch face.
1
From the watch face, hold MENU.
2
Select Watch Face.
3
Press UP or DOWN to preview the watch face options.
4
Select Add New to scroll through additional pre-loaded watch
faces.
5
Select > Apply to activate a pre-loaded watch face or an
installed Connect IQ watch face.
6
If using a pre-loaded watch face, select > Customize.
7
Select an option:
• To change the style of the numbers for the analog watch
face, select Dial.
• To change the sport for the gauges on the performance
watch face, select Select Sport.
Customizing Your Device 33