User Manual

Appendix
Backup Cameras
Your device can display the video feed from one or more
connected backup cameras.
Connecting a Wired Backup Camera
The device mount includes a 3.5 mm composite video input
jack. You can connect a wired backup camera and view the
output on the device screen.
Plug the camera video cable into the video input jack on
the mount.
Pairing a BC
™
35 Backup Camera with a Garmin
Navigation Device
You must enable the Wi‑Fi setting on your Garmin navigation
device before you can connect to a camera.
The BC 35 wireless backup camera is compatible with some
Garmin navigation devices with Android. Go to garmin.com/bc35
for more information about device compatibility.
You can pair up to four BC 35 wireless backup cameras with
your compatible Garmin navigation device.
1
Update your navigation device to the latest software.
Your device may not support the BC 35 camera without the
latest software. For more information about updating, see the
owner's manual for your navigation device.
2
Turn on the Garmin navigation device, and bring it within 3 m
(10 ft.) of the camera.
3
Select > Rear View.
4
Select an option:
• If this is the first camera you are connecting to the
navigation device, select Add New Camera.
• If this is an additional camera you are connecting to the
navigation device, select > Choose Camera > Add New
Camera.
5
Follow the on-screen instructions.
NOTE: The pairing code or password is located on the
transmitter or the camera.
After you complete the pairing process with a camera for the first
time, it connects automatically to the Garmin navigation device.
Viewing the Backup Camera
Your device shows video from the connected backup camera in
different ways, depending on how the camera is connected to
power.
1
Select an option to show video:
• If the camera is connected to a reverse lamp
(recommended), place the vehicle into reverse.
The device automatically shows video from the backup
camera.
• If the camera is connected to a steady power source,
select > Rear View to manually view the camera.
2
Select an option to resume normal device operation:
• If the camera is connected to a reverse lamp
(recommended), take the vehicle out of reverse.
The device automatically resumes normal operation.
• If the transmitter is connected to a steady power source,
select to manually hide the camera.
Switching Cameras
When multiple backup cameras are transmitting to your device,
you can switch between the views from the cameras.
1
Select > Rear View.
2
Select > Choose Camera.
3
Select a camera.
The video feed from the camera appears, and the camera
name appears at the top of the screen.
Connecting to a Wireless Display
You can show the contents of the device screen on a compatible
external display wirelessly.
1
Bring your device near the wireless display.
2
Select Settings > Display > Cast.
3
Select a wireless display.
4
If necessary, enter the PIN.
Data Management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: The device is compatible with Windows 7 and newer,
and Mac OS 10.4 and newer. Mac computers may require
additional third-party software to read and write files on Android
devices.
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Installing a Memory Card for Maps and Data
You can install a memory card to increase the storage space for
maps and other data on your device. You can purchase memory
cards from an electronics supplier, or go to www.garmin.com
/maps to purchase a memory card with pre-loaded Garmin
mapping software. The device supports microSD memory cards
from 4 to 64 GB.
1
Locate the map and data memory card slot on your device
(Garmin
®
Overview, page 1).
2
Insert a memory card into the slot.
3
Press it in until it clicks.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1
Plug the small end of the USB cable into the port on the
device.
2
Plug the larger end of the USB cable into a port on your
computer.
3
When your Garmin device prompts you to enter file transfer
mode, select Yes.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring Data From Your Computer
1
Connect the device to your computer (Connecting the Device
to Your Computer, page 24).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
2
On your computer, open the file browser.
24 Appendix