Full Product Manual

You can add a .gpx file that contains waypoints by transferring
the file to the GPX folder (Transferring Files to Your Device,
page 10).
Creating a Waypoint
You can save your current location as a waypoint.
1
Select Mark Waypoint.
2
If necessary, select a field to make changes to the waypoint.
3
Select Done.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
Select Waypoint Manager.
2
Select a waypoint.
3
Select menu > Project Waypoint.
4
Enter the bearing, and select Done.
5
Select a unit of measure.
6
Enter the distance, and select Done.
7
Select Save.
Navigating to a Waypoint
1
Select Where To? > Waypoints.
2
Select a waypoint.
3
Select Go.
Finding a Location by Name
1
Select Where To? > Waypoints > menu > Spell Search.
2
Enter the name or part of the name.
3
Select Go.
Editing a Waypoint
1
Select Waypoint Manager.
2
Select a waypoint.
3
Select an item to edit, such as the name.
4
Enter the new information, and select Go.
Deleting a Waypoint
1
Select Waypoint Manager.
2
Select a waypoint.
3
Select menu > Delete.
Waypoint Averaging
You can refine a waypoint location for more accuracy. When
averaging, the device takes several readings at the same
location and uses the average value to provide more accuracy.
1
Select Waypoint Manager.
2
Select a waypoint.
3
Select menu > Average Location.
4
Move to the waypoint location.
5
Select Start.
6
Follow the on-screen instructions.
7
When the confidence status bar reaches 100%, select Save.
For best results, collect four to eight samples for the waypoint,
waiting at least 90 minutes between samples.
Routes
A route is a sequence of waypoints or locations that leads you to
your final destination.
Creating a Route
1
Select Route Planner > Create Route > Select First Point.
2
Select a category.
3
Select the first point in the route.
4
Select Use.
5
Select Select Next Point to add additional points to the
route.
6
Select back to save the route.
Viewing a Route on the Map
1
Select Route Planner.
2
Select a route.
3
Select View Map.
Navigating a Saved Route
1
Select Where To? > Routes.
2
Select a route.
3
Select Go.
Viewing the Active Route
1
While navigating a route, select Active Route.
2
Select a point in the route to view additional details.
Editing the Name of a Route
1
Select Route Planner.
2
Select a route.
3
Select Change Name.
4
Enter the new name.
Editing a Route
1
Select Route Planner.
2
Select a route.
3
Select Edit Route.
4
Select a point.
5
Select an option:
• To view the point on the map, select Review.
• To change the order of the points on the route, select
Move Up or Move Down.
• To insert an additional point on the route, select Insert.
The additional point is inserted before the point you are
editing.
• To remove the point from the route, select Remove.
6
Select back to save the route.
Deleting a Route
1
Select Route Planner.
2
Select a route.
3
Select Delete Route.
Reversing a Route
You can switch the start and end points of your route to navigate
the route in reverse.
1
Select Route Planner.
2
Select a route.
3
Select Reverse Route.
Stopping Navigation
Select Where To? > Stop Navigation.
Tracks
A track is a recording of your path. The track log contains
information about points along the recorded path, including time,
location, and elevation for each point. By default, the device
creates a track log while you move with the device turned on.
Recording Track Logs
1
From the Main Menu, select Setup > Tracks > Track Log.
2 Waypoints, Routes, and Tracks