GARMIN INDEX S2 SMART SCALE ™ Owner’s Manual
© 2020 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started............................................................... 1 Device Overview ......................................................................... 1 Setting Up Your Device.................................................. 1 Additional Users .......................................................................... 1 Changing Your Wi‑Fi Connection ............................................... 2 Reading and Recording Measurements.......................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview NOTE: This does not change the units of measure in your Garmin Connect™ account. Status Icons Icons appear on the LCD screen to indicate connection status and to indicate which metric is displayed on the screen. Flashing wireless signal icons indicate the device is searching for a signal.
After the person accepts the invitation, they can use the Garmin Index S2 device. Changing Users The Garmin Index S2 device distinguishes between users automatically based on weight. When you step on the device, it weighs you and displays your initials on the screen. If the device detects the wrong user, you can change users. • Tap the device to view the registered users. • If you are an unregistered or guest user, tap the device until appears.
How do I wake up the device? 1 Tap the scale with your toe. A short, sharp tap wakes up the scale. 2 When the scale displays 0.0, step on the scale. My device is not recording measurements • Verify that you have completed the setup process and the device is connected using Wi‑Fi technology (Setting Up Your Device, page 1). • Verify that the batteries are installed correctly. • Replace or charge low batteries. • Remove socks before stepping on the scale.
Appendix Body Mass Index Nutritional Status CAUTION This data is not intended to diagnose any medical condition. Always consult your health care provider. Body mass index (BMI) is your weight divided by the square of your height. These status categories are based on the BMI values for adults provided by the World Health Organization. It is used for both men and women, age 18 or older. BMI Range Nutritional Status Less than 18.5 Underweight 18.5 to 24.9 Normal weight 25 to 29.9 Pre-obesity 30 to 34.
Index A accessories 3 B battery 1 installing 1 Bluetooth technology 1 body fat percentage 4 body mass index 4 C cleaning the device 3 computer, connecting 2 D deleting, measurements 2 device, cleaning 3 G Garmin Connect 1, 2 Garmin Express 3 I icons 1 initial setup 1–3 K keys 1 M measurements 2, 3 P pairing 2 R resetting the device 3 S software, updating 3 specifications 3 T troubleshooting 3 U units of measure 1 updating software 3 user data 2 user profile 2 users, adding 1 W Wi-Fi 3 widgets 2
support.garmin.