User Manual

Changing the Bands
The device is compatible with standard quick-release bands. Venu 2S has 18 mm wide bands, and Venu 2 has
22 mm wide bands.
1 Slide the quick-release pin on the spring bar to remove the band.
2 Insert one side of the spring bar for the new band into the device.
3 Slide the quick-release pin, and align the spring bar with the opposite side of the device.
4 Repeat steps 1 through 3 to change the other band.
Troubleshooting
Is my smartphone compatible with my device?
The Venu 2 series device is compatible with smartphones using Bluetooth technology.
Go to www.garmin.com/ble for compatibility information.
My phone will not connect to the device
If your phone will not connect to the device, you can try these tips.
• Turn off your smartphone and your device, and turn them back on again.
• Enable Bluetooth technology on your smartphone.
• Update the Garmin Connect app to the latest version.
• Remove your device from the Garmin Connect app and the Bluetooth settings on your smartphone to retry
the pairing process.
• If you bought a new smartphone, remove your device from the Garmin Connect app on the smartphone you
intend to stop using.
• Bring your smartphone within 10 m (33 ft.) of the device.
• On your smartphone, open the Garmin Connect app, select or , and select Garmin Devices > Add
Device to enter pairing mode.
• From the watch face, hold , and select > Phone > Pair Phone.
My headphones will not connect to the device
If your headphones were previously connected to your smartphone using Bluetooth technology, they may
connect to your smartphone before connecting to your device. You can try these tips.
• Turn off Bluetooth technology on your smartphone.
Refer to the owner's manual for your smartphone for more information.
• Stay 10 m (33 ft.) away from your smartphone while connecting headphones to your device.
• Pair your headphones with your device (Connecting Bluetooth Headphones, page 8).
Troubleshooting 51