Owner's Manual

Transmitter Location and Wiring Considerations
NOTICE
The transmitter is not intended to be held or worn on your body while it is in use.
When selecting a location to install the wireless transmitter, observe these considerations.
• You should test a proposed installation location before you permanently install the transmitter.
• Some vehicles do not provide constant minimum voltage to the reverse lamps. You should use an
automotive relay when connecting the transmitter and camera to a power source that does not provide
constant voltage.
• Although the transmitter can transmit the video signal approximately 50ft (15.24m), the location of the
transmitter can affect this range.
◦ The closer you install the transmitter to the device, the more reliable the signal.
◦ The signal transmits from the flat front and back surfaces of the transmitter. The transmitter provides
the best signal when either flat surface points toward the receiver.
◦ Dense metal or appliances in the path of the transmitter greatly reduce the transmission distance.
◦ The fewer solid objects that exist between the path of the transmitter and the device, the more reliable the
signal.
• The fuse holder located near the transmitter is not waterproof. Installing the fuse holder in a location that is
exposed to the elements is not recommended.
• The connector between the camera and the transmitter is not waterproof. If you make this connection in a
location exposed to the elements, you must make sure that the connection is waterproof.
• If you are installing the camera on a boat trailer or other location that may be exposed to water, you must
waterproof all wiring connections and the fuse holder in the transmitter cable.
3