BC 50 NIGHT VISION ™ Owner’s Manual
© 2022 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction......................................1 Viewing the Backup Camera............. 1 Pairing a BC 50 Night Vision Camera with a Garmin® Navigation Device.... 1 Guidance Lines................................. 2 Multiple Cameras............................. 3 Specifications..................................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Viewing the Backup Camera WARNING This device is intended to enhance your situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. Only access the information displayed on the device with a glance.
Guidance Lines NOTICE The guidance lines feature is intended for informational and reference purposes only. You are responsible for maintaining awareness of your surroundings. Guidance lines provide an approximate visual representation of the vehicle's path when in reverse. To provide the most accurate reference, you must align the guidance lines for each backup camera. You should not use the guidance lines feature if you have not aligned the guidance lines.
Showing or Hiding Guidance Lines 1 Select an option: • From the camera view, tap the screen, and select • From the camera view, select > Adjust Video. 2 Select . 3 Select . . Multiple Cameras You can pair a maximum of four compatible Garmin wireless cameras. Switching Cameras When multiple backup cameras are transmitting to your device, you can switch between the views from the cameras. From the camera view, select an option: • Select . • Tap the screen, and select a camera at the bottom of the screen.
Specifications Camera and transmitter input voltage From 9 to 28 Vdc Transmitter fuse 2 A, fast-blow Camera and transmitter current usage 300 mA at 12 Vdc Water rating (camera and transmitter) IEC 60529 IPX671 Operating temperature range From -20° to 60°C (from -4° to 140°F) Wireless frequency 2.4 GHz @ 17.5 dBm maximum 1 The device is protected against the ingress of dust and withstands incidental exposure to water of up to 1 m for up to 30 min.
support.garmin.