Owner's Manual

Replacing the Heart Rate Monitor
Battery
1 Use a small Phillips screwdriver to remove
the four screws on the back of the module .
2 Remove the cover and battery.
3 Wait 30 seconds .
4 Insert the new battery with the positive
side facing up.
NOTE: Do not damage or lose the 0-ring
gasket.
5 Replace the back cover and the four
screws.
After you replace the heart rate monitor
battery , you may need to pair it with the device
aga1n.
Heart Rate Monitor Specifications
Battery type
User-replaceable CR2032,
3 volts
Battery life
Up to 4.5 years (1 hour per
day)
6