Instructions 2 Instructions 6 lstruzioni 10 Anweisungen 14 lnstrucciones 19 lnstru~oes 23
I Constant Power Cable Instructions Getting Started ~ When installing the device in a vehicle, you must install the device securely so it does not interfere with the vehicle operating controls, such as the foot pedals, or the driver's feet. Interference with the vehicle operating controls or feet can result in an accident, which could result in injury or death.
depending on the make and model of your vehicle. See your vehicle owner's manual for more information. Remove the protective film from one reclosable fastener, and press the reclosable fastener firmly onto the USB port end of the device for 1Oseconds . ... 4 5 6 7 Clean the vehicle mounting surface using water or alcohol, and a lint-free cloth. Allow the surface to dry completely.
8 Connect the USB power cable from your Garmin Dash Cam™ device to a USB port on the Constant Power Cable device. Time Switch The time switch © sets the length of time the device continues to supply power after you exit the vehicle. The device reenables power when it detects motion, or when you reenter the vehicle.
If you want the device to remain off until you reenter the vehicle, you should select the 1Om option. If you want the device to operate continuously while the vehicle is parked, you should select the 24h or oa option. Status LED The status LED shows the device status. Status LED Status Activity Red The device Is supplying power to the connected devices. Flashing red The timer has expired and the device is no longer supplying power to the connected devices.
© 2021 Garmin Ltd. or its subsidiaries Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Dash Cam"' is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. El numero de registro COFETEUIFETEL puede ser revisado en el manual a traves de la siguiente pagina de internet.