SPEED SENSOR 2 AND CADENCE SENSOR 2 Owner’s Manual
© 2019 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.....................................................................1 Installing the Speed Sensor ........................................................ 1 Installing the Cadence Sensor .................................................... 1 Pairing the Sensors with Your Device ........................................ 1 Garmin Connect™ ...................................................................... 1 Device Information...................................................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Always consult your physician before you begin or modify any exercise program. Installing the Speed Sensor NOTE: If you do not have this sensor, you can skip this task. TIP: Garmin recommends you secure your bike on a stand while installing the sensor. 1 Place and hold the speed sensor on top of the wheel hub.
Pairing the Speed Sensor With Your Smartphone Replacing the Cadence Sensor Battery The speed sensor must be paired directly through the Garmin Connect app, instead of from the Bluetooth settings on your smartphone. 1 From the app store on your smartphone, install and open the Garmin Connect app. 2 Bring your smartphone within 3 m (10 ft.) of the sensor. NOTE: Stay 10 m (33 ft.) away from other wireless sensors while pairing. 3 Rotate the wheel two revolutions to wake up the sensor.
• Remove your device from the Garmin Connect app or your Garmin device to retry the pairing process. If you are using an Apple device, you should also remove your device from the Bluetooth settings on your smartphone. ® Limited Warranty The Garmin standard limited warranty applies to this accessory. For more information, go to www.garmin.com/support/warranty .html.
Index A ANT+ sensors 1 applications, smartphone 2 B battery, replacing 2 Bluetooth sensors 1 D data storing 1 transferring 1 G Garmin Connect 1, 2 I installing 1 P pairing sensors 1 smartphone 2 S smartphone, pairing 2 specifications 2 speed and cadence sensors 1, 2 storing data 1 T troubleshooting 2 4 Index
support.garmin.