User Manual
Table Of Contents
- Table of Contents
- Introduction
- Training
- My Stats
- Performance Measurements
- Personal Records
- Training Zones
- Navigation
- Connected Features
- Wireless Sensors
- History
- Customizing Your Device
- Connect IQ Downloadable Features
- Profiles
- About Training Settings
- Phone Settings
- System Settings
- Setting Up Extended Display Mode
- Device Information
- Troubleshooting
- Appendix
- Index
Training
Going for a Ride
If your device was packaged with a wireless sensor, they are already paired and can be activated during initial
setup.
1 Hold to turn on the device.
2 Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3 From the home screen, select .
4 Select an activity profile.
5 Select to start the activity timer.
NOTE: History is recorded only while the activity timer is running.
6 Select or for additional data screens.
7 If necessary, select to view menu options such as alerts and data fields.
8 Select to stop the activity timer.
TIP: Before you save this ride and share it on your Garmin Connect account, you can change the ride type.
Accurate ride type data is important for creating bike friendly courses.
9 Select Save Ride.
Segments
Following a segment: You can send segments from your Garmin Connect account to your device. After a
segment is saved to your device, you can follow the segment.
NOTE: When you download a course from your Garmin Connect account, all segments in the course are
downloaded automatically.
Racing a segment: You can race a segment, trying to match or exceed your personal record or other cyclists
who have ridden the segment.
8 Training