User Manual
Table Of Contents
- Table of Contents
- Introduction
- Training
- My Stats
- Performance Measurements
- Personal Records
- Training Zones
- Navigation
- Connected Features
- Wireless Sensors
- History
- Customizing Your Device
- Connect IQ Downloadable Features
- Profiles
- About Training Settings
- Phone Settings
- System Settings
- Setting Up Extended Display Mode
- Device Information
- Troubleshooting
- Appendix
- Index
Updating Your Activity Profile
You can customize ten activity profiles. You can customize your settings and data fields for a particular activity
or trip.
1 Select Menu > Settings > Activity Profiles.
2 Select an option:
• Select a profile.
• Select Create New to add or copy a profile.
3 If necessary, edit the name and color for the profile.
4 Select an option:
• Select Data Screens to customize the data screens and data fields (Adding a Data Screen, page 48).
• Select Default Ride Type to set the type of ride that is typical for this activity profile, such as commuting.
TIP: After a ride that is not typical, you can manually update the ride type. Accurate ride type data is
important for creating bike friendly courses.
• Select Segments to turn on your enabled segments (Enabling Segments, page 9).
• Select ClimbPro to enable the ClimbPro feature (Using ClimbPro, page 28).
• Select Alerts to customize your training alerts (Alerts, page 48).
• Select Auto Features > Auto Lap to set how laps are triggered (Marking Laps by Position, page 50).
• Select Auto Features > Auto Sleep to automatically enter sleep mode after five minutes of inactivity
(Using Auto Sleep, page 50).
• Select Auto Features > Auto Pause to change when the activity timer automatically pauses (Using Auto
Pause, page 51).
• Select Auto Features > Auto Scroll to customize the display of the training data screens when the activity
timer is running (Using Auto Scroll, page 51).
• Select Timer Start Mode to customize how the device detects the start of a ride and automatically starts
the activity timer (Starting the Timer Automatically, page 51).
• Select Nutrition/Hydration to enable food and drink consumption tracking.
• Select MTB/CX > Grit/Flow/Jump Recording to enable grit, flow, and jump recording.
• Select Navigation > Map to customize the map settings (Map Settings, page 29).
• Select Navigation > Routing to customize the routing settings (Route Settings, page 30).
• Select Navigation > Navigation Prompts to show navigation messages using a map view or text prompt.
• Select Navigation > Sharp Bend Warnings to enable navigation warning messages for difficult turns.
• Select GPS Mode to turn off GPS (Training Indoors, page 13) or change the satellite setting (Changing the
Satellite Setting, page 51).
All changes are saved to the activity profile.
Customizing Your Device 47